Operation Controls and Functions, Front Panel

4. OPERATION CONTROLS AND FUNCTIONS

4.1. Front Panel

DC 5V

AT-HD570

BITSTREAM

LPCM

5.1/7.1CH

2CH

POWER

OFF

HDMI

INPUT

AUDIO

LINK TV

①

②

③

④

1.HDMI input: Connect the HDMI input port to the HDMI output port of your source equipment such as DVD player or set-top-box.

2.Audio selection switch: To switch between Bitstream/LPCM7.1/5.1/LPCM2 channels.

Note: When switch to other audio mode, the display will disappear for few seconds. This is normal phenomenon for the system.

3.Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.

4.Audio Link TV dip switch: Set the dip switch to OFF when sending an audio signal only and do not have an HDMI display where the HD570 will be connected to.

If sending an audio and video signal where the HDMI output of the HD570 will be connected to a display, please set the dip switch to ON.

4.2. Rear Panel

HDMI OUT

①

FL/FR LFE/FC RL/RR RLC/RRC

MULTI CHANNEL OUT OPTICAL OUT

② ③

1.HDMI output: Connect the HDMI output port to the HDMI input port of your display.

2.Multi channel output: Connect the audio channel output to the input of your ampliﬁer equipment and follow the ampliﬁer connections.

FL: Front Left

FR: Front Right

LFE: Low Frequency Effect

FC: Front Center

RL: Rear Left

RR: Rear Right

RLC: Rear Left Center

RRC: Rear Right Center

3. Optical output: Connect Optical output to the display audio input or audio equipments for Dolby5.1/2 and

LPCM2 channels.	2

AT-HD570 specifications

The Atlona AT-HD570 is a versatile HDMI to HDBaseT receiver designed to facilitate high-quality video and audio transmission over extended distances. This innovative device is a key component in modern audiovisual installations, ideal for commercial environments, educational settings, and residential systems that require reliable connections from remote sources to display devices.

One of the standout features of the AT-HD570 is its ability to transmit HDMI signals over long distances—up to 328 feet (100 meters) at 1080p resolution. This is achieved through the use of HDBaseT technology, which enables the extension of video, audio, control, and even power over a single Ethernet cable. This capability simplifies installation and reduces the need for multiple cables, making it a cost-effective solution for AV professionals.

The AT-HD570 supports a wide range of video resolutions, including 4K (3840x2160) at 30 Hz and 1080p at 60 Hz, ensuring that it can handle modern high-definition content. Additionally, it is compatible with various audio formats, including PCM, DTS-HD, and Dolby TrueHD, making it suitable for diverse audio requirements. The device features CEC (Consumer Electronics Control) support, allowing for simplified control of connected devices while streamlining the overall user experience.

Built with reliability in mind, the AT-HD570 features robust steel housing that ensures durability and reduces the risk of damage in busy environments. The device also comes with an intuitive and easy-to-use interface, simplifying setup and configuration. Its compact design allows for flexible placement, while the rear panel connectivity options provide versatility for various installation scenarios.

The Atlona AT-HD570 is engineered to integrate seamlessly with other Atlona products, providing an extensive solution for any AV system. As a part of Atlona's comprehensive line of products, it enhances system design flexibility, making it an essential choice for integrators and installers looking for efficient and effective HDMI extension solutions. Overall, the AT-HD570 stands out as an essential tool for delivering high-quality AV performance in any setting.