Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Instructions Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If the outlet is a standard 2-prong outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Installation

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

Troubleshooting Tips

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the refrigerator until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Consumer Support

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Page 4
Image 4
GE 23, 25 operating instructions Troubleshooting Tips, Consumer Support, Instructions Operating Instructions
Page 3 Page 5

23, 25 specifications

The GE 23 and GE 25 are groundbreaking gas turbine models developed by General Electric, targeting the rapidly evolving energy market with high efficiency and reliability. Both models are integral components of GE’s gas turbine portfolio, designed specifically for a broad range of applications, including power generation and industrial use.

The GE 23 is characterized by its compact design, making it suitable for both small-scale and large-scale applications. With a power output ranging from 23 to 30 megawatts, the GE 23 is equipped with advanced aerodynamics and combustion technologies that significantly enhance its overall performance. One of the standout features of the GE 23 is its ability to offer flexible operation, allowing it to adapt to changing energy demands while minimizing emissions. This flexibility is facilitated by its advanced control systems that ensure optimal performance in varying operational conditions.

In contrast, the GE 25 is designed for larger-scale power generation, delivering outputs of up to 30 megawatts. This model incorporates the latest advancements in material science, providing improved durability and operational lifespan. The GE 25 utilizes high-efficiency blades made from advanced alloys that can withstand extreme temperatures, contributing to improved thermal efficiency. Moreover, the GE 25 features advanced digital controls and monitoring systems, enabling real-time performance optimization and predictive maintenance.

Both turbines employ advanced combustion technology to achieve reduced NOx emissions, aligning with environmental regulations and sustainability goals. These technologies are complemented by GE’s commitment to integrating renewable energy sources into the power grid, enhancing the flexibility of operations.

The GE 23 and GE 25 boast remarkable reliability and lower operational costs, attributed to their simplified maintenance processes and robust design. They are equipped with modular components that facilitate easier serviceability, enabling operators to minimize downtime and optimize their power generation capabilities.

Additionally, the incorporation of advanced digital analytics into both models allows for enhanced performance tracking and system diagnostics, ensuring that operators can maximize efficiency and mitigate risks.

In conclusion, the GE 23 and GE 25 represent the pinnacle of gas turbine technology, combining efficiency, flexibility, and reliability. Their innovative features and commitment to sustainability make them formidable choices for power generation in the modern energy landscape. As global energy demands continue to rise, these models are poised to play a vital role in shaping the future of energy production.
Top Page Image Contents