Atlona AT-HD420 user manual Front Panel, Rear Panel, VGA Connection

PANEL DESCRIPTION

5.1. Front Panel

12 3

1.Output Format switch: Set the switch to VGA when your HDMI source equipment is connected to a PC monitor or projector. Use a VGA cable to connect between the AT-HD420 VGA out and the VGA input of your PC monitor or a projector. Set the dip switch to component video when your HDMI source equipment is con- nected to the component video input on an HDTV display. Use the included VGA to 3 RCA adaptor cable to connect the AT-HD420 component out to the component input of your HDTV.

2.HDMI input: Connect the HDMI input port of the AT-HD420 to an HDMI or DVI output port of a source such as a DVD player or PC.

3.Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.

5.2. Rear Panel

12

1.VGA/Component: Connect the output port to the VGA/Component input of a PC monitor, Projector or TV.

2.L/R: stereo audio output via 1/8 inch (3.5mm) stereo jack.

CONNECTION AND OPERATION

LCD Monitor

6.1. VGA Connection

or

HDMI cable

DVD		VGA cable
or
	DVI to HDMI adapter
	(W/O audio)

Laptop Front Panel RearPanel

Projector

3.5mm stereo cable

atlona.com	4	Toll free: 1-877-536-3976
		Local: 1-408-962-0515