Datavideo VDR-3000 instruction manual Switching on, Playing a disk

OPERATION

Switching on

Once all cables are in place it is ok to power on the VDR-3000.

Press the Power Button on the front of the VDR 3000 or on the remote control handset, the display panel should light up and display ” - - - -“.

Power on the TV Monitor and select the correct A/V channel, the VDR 3000 start-up screen will appear. The TV screen it will display ” Insert CD”.

1

Playing a disk

Press the Eject Button on the front of the VDR 3000 or on the remote control handset and the CD tray will slide open.

The VDR 3000 will accept Audio CD, VCD, HQ-VCD, S-VCD, DVD-Photo or CDDVD disks.

Place the disk that you want to load onto the tray, printed side facing up.

Press the Eject Button and the CD tray will close and “LOAD” will appear on the display panel.

After a few moments the display panel will indicate the format of the loaded disk (CD/VCD/HQVCD/SVCD/DVD-PHOTO/ CDDVD). It will also show how many tracks the loaded disk features and the total running time of the disc.

Note: The VDR-3000 cannot play DVD media.

To play the disc from the beginning, press the Play Button on the VDR 3000 or on the remote control handset.

To play a specific track, select the track number from the numeric keypad on the remote control handset.

To skip forward to the next track press the Next Button on the VDR 3000 or remote control handset

1Screen shots are simulated.

17