EverFocus EDR920, EDR1640, EDR1620 instruction manual Open

Search from EVENT LIST:

I.Select Event Type from Alarm, Motion and Vloss.

II.Press Update button to refresh the event list.

III.All events of the selected type will be displaying along with Date/Time, event type (represents by a capital letter), camera number (represents by a number), e.g. M02 is the motion event from camera 2.

IV.	Current page and total page are shown below the event list. Press << for
	first page, << for previous page, >> for next page, >> for last page, or
	simply input the page number, then press	GO	.

V.Press Play button to playback the selected event.

Search by Time:

Search the starting date and time by entering Year/Month/Date/Hour/Min/Sec of the happening event. Then press Play button to playback.

Playback by PTZ CONTROL:

I.Select the PTZ camera from drop-down menu.

II.Select Action Mode. 4 options are available: Continuous, Step x10, Step x5 and Step x1.

III.Use Direction Arrows (up, down, left, right) to move/adjust the focus to your desired direction and angle.

IV. Press Z+ for Zooming In or Z- for Zooming Out.

V.In Focus option, press Near to move the focus closer to the subject. Or you can move the focus farther from the subject by pressing Far .

VI.

You can turn on the Iris by pressing

Open

or turn it off by pressing

Close

.

VII.

“Preset” helps you to define the preset point at which you would like to see

the subject. Press

Set

for confirmation,

Clear

to exit or

Jump

to jump to a

specific point.

VIII.

“Auto Pan” is to define the speed of PTZ camera when moving horizontally,

please select from

Lower

,

Low

,

Middle

,

High

to

Higher

. Press

Run

for confirmation or

Stop

to exit.

70