EverFocus EDSR-900 instruction manual Record Setting Menu

MENU

6.8 RECORD SETTING MENU

RECORD SETTING MENU

NORMAL RECORD

SPEED	: 50 IPS
QUALITY	: STANDARD
DISK FULL	: REWRITE

ALARM RECORD

OPERATION ON

SPEED: 50 IPS

QUALITY : STANDARD

PRE-ALARM RECORD

OPERATION ON

In NORMAL RECORDING MENU, we define

(1)NORMAL RECORD:

SPEED : To set the normal recording speed. Maximum 60 (NTSC) / 50 (PAL).

QUALITY: Video recording quality setup for setting the quality of the video picture by selecting a compression rate. There are six quality levels for recording

LOWER	: 15 KB
LOW	: 19 KB
BASIC	: 23 KB
STANDARD : 27 KB
HIGH	: 31 KB
SUPERIOR	: 35 KB

DISK FULL: Set REWRITE or STOP when HDD is full.

(2)ALARM RECORD (for Alarm In and Motion detection):

OP (Operation): Select ON or OFF to activate alarm recording or not.

SPEED : To set the alarm and motion recording speed. Maximum 60 (NTSC) / 50 (PAL).

QUALITY: Video recording quality setup, this item lets you set the quality of the video picture by selecting a compression rate.

NOTE: The record rates are for the total system: The single camera record rate is: Camera record rate = System record rate / Number of connected cameras Example: Record Rate 50 Ips, 6 connected cameras: ~ 8,3 Ips / camera

(3)PRE-ALARM RECORD: (with Alarm In and Motion)

Pre – Alarm duration is depending on record quality (about 8-15 seconds). OP (Operation): Select ON or OFF to activate pre-alarm recording or not .

Turn the JOG dial clockwise or counter-clockwise to select the options.

Press ENTER key to confirm the option and move to next column.

ENTER

MENU

Press MENU key to return to Main Menu, press again to leave Set up Menu.

19