![](/images/new-backgrounds/1244358/244358163x1.webp)
4.9 SYSTEM SETTING
Figure 4-30 is a screen shot of the SYSTEM SETTING MENU. This menu is for setting up general system parameters for the DVR.
Figure 4-30 System Menu – Date/Time
4.9.1 Date/Time
Date: Set current Date.
Time: Set current Time.
Date Format: Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.
Time Format: Change time format between 12H and 24H mode.
Time Zone: Set the time zone that the DVR adjusts to when updating from the time server.
NTP: Select “Enable” or “Disable” NTP time synchronization.
NTP Server: Displays the time server address that the DVR uses for time synchronization. Requires operating network configuration and WAN or LAN access to a compatible NTP server.
To find a compatible NTP address, please follow these steps:
a)Go to a PC that is connected to the internet.
b)Click on “START”
c)In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.
74