EverFocus ECOR264-16X1, ECOR264-9X1, ECOR264-4X1 user manual Alarm Action Setting from front panel

Page 83

4.Change the section to different mode (with a different color) by clicking on the first block of the section. The color switches from gray -> orange -> gray, every time user clicks the first block of a section. Orange indicates ‘alarm action recording ON’.

5.To set the end of a timezone, select the time block following the end of the timezone defined in the step above. The first click will highlight the block in blue. A second click will toggle the state/color of that block and the remainder of the time bar, ending the above defined timezone

Alarm Action Setting from front panel

1.Enter Alarm Action setting mode: highlight the “Alarm Action: menu choice and press the “Enter” button to enter Alarm Action setting mode. At this time, the whole editing area at the right side will be highlighted within a blue frame. See image below.

2.Enter alarm selection mode: Use Up/Down arrow key to switch to Alarm selection mode.

3.Selecting alarm: Use Right/Left arrow key to select an alarm to configure. Selected alarm number will be highlighted by a blue frame. See above image.

4.Enter time bar editing mode: Use Up/Down arrow key to switch to time bar editing mode. When this mode is selected, the area surrounding the time bars will be highlighted within a blue frame..

5.Select desired time bar for setting: press the Enter button, the first time bar will be selected and highlighted in a red frame. See below image. Use the Up/Down arrow keys to choose the desired time bar for setting.

75

Image 83
Contents ECOR264-4X1 DVR ECOR264-9X1 DVR ECOR264-4X1 DVR ECOR264-9X1 DVR Retain Instructions Safety PrecautionsCleaning Read InstructionsServicing Power Cord ProtectionAttachments Water and MoistureWeee Table of Contents DVR Configuration Vii Networking OverviewProduct Overview FeaturesPackage Contents ECOR264X1 SpecificationsCE, FCC, UL Front Panel Remote Control ReceiverPage Rear Panel Rear PanelPage Alarm Input Contacts Video INPUTS/OUTPUTS InstallationAlarm Contacts Installation General RS-485 bus installation RS-485 keyboard / PTZ InstallationAlarm Output Relay System expansion with RS-485 signal distributor EKB-500 connection to several DVRs Speed Dome Installation2 RS-485 socket pin assignment EKB-500 connection with network patch cableDirect PC Connection through Crossover Network Cable USB-Mouse installationNetwork Connection Network Connection through Patch Cable Final Install ProcessOSD Root Menu How to select a channel / Enable audioGeneral USB Mouse Operation Field Input Options Operation in the Configuration MenusPage Front Panel Key Review Operation in Configuration MenuGeneral Front Panel Operation Field Input Options Page Record LoginChange Audio Output Operation Select Camera Operation2009/05/25 090930PM 2009/05/25 090940PM 2009/05/25 091030PM PlaybackPTZ Express Control of PTZ RememberExpress Control PTZ Layout Channel SwitchingBring a camera to full screen mode Zoom DisplaySequence Zoom Express Control Time Search SearchSearch Menu Event Search Event SearchFrom Smart SearchPage Page Search Menu Snapshot Search Snapshot SearchSearch Menu Snapshot Search result 10 Copy Menu Copy11 Logout Confirmation window LogoutExpress Configuration MenuRecord With Record Mode Choose fromNetwork Type Correctly if you plan to use the Ddns feature see SectionBasic Setting Camera SettingPage Page Camera Menu Video Adjust Video AdjustCamera Menu Motion MotionPage Camera Menu Motion Grid Setting Camera Menu Video Loss Video LossRecord & Play Menu Record & Play SettingBuilt-in Calculator RecordRecord & Play Menu-Built-in Cal Xx days of data can be stored based on current settingRecord & Play Menu Play PlayAlarm Alarm & Event SettingPage Page Event 11 Alarm & Event Menu EventFan Failure 12 Alarm & Event Menu Event Fan Failure13 Alarm & Event Menu Event HD Temperature HD TemperatureHD Failure 14 Alarm & Event Menu Event HD FailureHD Full 15 Alarm & Event Menu Event HD FullHD Off 16 Alarm & Event Menu Event HD Off17 Alarm & Event Menu Event Power Loss Power LossRecord Stop 18 Alarm & Event Menu Event Record StopNetwork Loss 19 Alarm & Event Menu Event Network LossExpress Setup Schedule Setting21 Schedule Menu-Holidays Holidays22 Schedule Menu-Schedule ScheduleSchedule Setting from front panel To Set Schedule using MousePage 23 Schedule Menu-Schedule-Edit Timezone Editing TimezonePage Page 24 Schedule Menu-Alarm Action Alarm ActionAlarm Action Setting from front panel Page Page 1 LAN Network SettingPage 26 Network Menu Email EverfocusDDNS DdnsPage 29 Network Menu Alarm Server Alarm ServerDisk Disk Information31 Disk Menu-Lock/Format LockMain Monitor Display SettingMonitor OSD Call Monitor 33 Display Menu Main M/T SEQ Main M/T SEQ34 Display Menu Main M/T SEQ Call M/T SEQDate/Time System Setting36 System Menu Daylight Saving Daylight SavingAdd User39 System Menu User Edit EditMain Menu at the DVR Configuration Menu at the DVRRS485 10.4 I/O ControlRS232 Firmware ControlMisc Configurations Network InformationSystem SystemLog Type 11.2 Log100 Gateway Address Introduction to TCP/IPSubnet Masks Virtual Ports Pre-InstallationWhat is your Network Setup? Crossover Ethernet Cable Pin outs Simple One to One ConnectionConnection Procedure 106 107 108 Straight Through Ethernet Cable Pin outs Direct High Speed Modem Connection110 Router or LAN Connection 112 To set DVR for Internet Connection through router Remote Operation from Browser Connecting to ECOR264Installing ActiveX controls Browser Security Setting116 117 Enabling ActiveX Controls Prompt Enable120 Remote Live View 122 Remote Playback Everfocus Ddns Setup 125 Typical Linksys Port Forwarding Linksys & D-LINK Port ForwardingHttp Typical D-LINK Port Forwarding Virtual Server Select Enabled or Disabled Schedule Cannot connect to the recorder via the internet DVR will not go into record modeDVR displays nothing on the main monitor 132 Appendix a Timing of Alarm Modes Timeout Mode 135 Appendix B Express Setup Recording Value Selection Rules 137 Appendix C Remote Control 4605XCOR04004AR
Related manuals
Manual 2 pages 49.77 Kb

ECOR264-16X1, ECOR264-9X1, ECOR264-4X1 specifications

EverFocus has established itself as a prominent player in the surveillance technology arena, and its ECOR264 series—comprised of the ECOR264-4X1, ECOR264-9X1, and ECOR264-16X1 models—demonstrates the company’s commitment to innovative design and cutting-edge technology. These Digital Video Recorders (DVRs) cater to a wide array of security needs, making them ideal for various applications including residential, commercial, and institutional surveillance.

One of the hallmark features of the ECOR264 series is its support for H.264 compression technology. This advanced codec provides superior video quality while optimizing bandwidth use, allowing users to store more video data without compromising on clarity. The ECOR264 DVRs ensure that even during peak usage times, video playback remains seamless and high definition.

Each model in the ECOR264 lineup offers different channel configurations to accommodate diverse surveillance setups. The ECOR264-4X1 supports up to four camera inputs, making it an excellent choice for smaller installations. Meanwhile, the ECOR264-9X1 provides support for nine channels, striking a balance between capacity and versatility. For larger surveillance needs, the ECOR264-16X1 model boasts support for up to sixteen channels, making it suitable for expansive environments requiring comprehensive monitoring.

These DVRs come equipped with user-friendly features such as remote access capabilities, allowing users to monitor live feeds and recorded footage from anywhere via smart devices. The intuitive interface simplifies system navigation, making it easy for users to review recordings, adjust settings, and manage connected cameras.

In terms of performance, the ECOR264 series provides real-time recording at up to 30 frames per second per channel, ensuring smooth playback and minimal motion blur. Furthermore, the models support multiple recording modes, including continuous, scheduled, and motion-detected recording, providing flexibility to meet specific security requirements.

Storage is another critical aspect, and EverFocus has equipped these devices with the ability to connect to multiple hard drives. This scalability allows users to select larger capacities as their data storage needs grow. Additionally, the ECOR264 series is compatible with various IP cameras, enhancing its functionality and adaptability for diverse scenarios.

In summary, the EverFocus ECOR264 series of DVRs stands out for its robust features, advanced H.264 compression technology, user-friendly interface, and flexible storage options. Whether it’s for a small business or a large facility, these models provide powerful and reliable video surveillance solutions tailored to meet modern security challenges.