(1)HDD : HDD is activated
(2)HDD FULLHDD is full
(3)ALARMWhen Alarm Enable : Yes (when alarm is triggered, the led is flashing)
(4)TIMERWhen Timer Enable : Yes
(5)PLAYPlay operation
(6)RECRecording operation
3.3Back panel connection
VIDEO IN
POWER | ALARM |
VIDEO OUT
1. VIDEO IN
Connect to video source, such as quad, multiplexer, or camera.
2.VIDEO OUT
Connect to monitor, if no operation with quad or multiplexex, as Fig Connect to video input of quad, multiplexer, as Fig.
3.External I/O : RS232 / Alarm input
Controlled remotely by an external device or control system.
Alarm input, external I/I explanation.
25 pin com port
11