3.9.2.3Press Menu to exit and confirm current operation.
3.9.2.4Press again Menu to exit and close System Setup mode.
3.9.3Remote protocol Transmitting Baud Rate setup
3.9.3.1Press “Enter” to confirm Baud Rate setup.
3.9.3.2Press ”▲” “▼” to choose the Baud Rate 115200576001920096004800360024001200
3.9.3.3Press Menu to exit and confirm current operation.
3.9.3.4Press again Menu to exit and close System Setup mode.
3.9.4Remote protocol ID setup :
You can use RS232 remote protocal to control different DVR. ID number can be set
from 000 to be 999.
3.9.4.1Press “Enter” to confirm ID setup
3.9.4.2Press ”▲” “▼” to set numerical number, and press “◄” “ ►” to move digit
location x x x (3 digits)
3.9.4.3Press Menu to exit and confirm current operation.
3.9.4.4Press again Menu to exit and close System Setup mode.
3.10Event
3.9.1Enter “ Event “ list
To press ”MENU” to enter main menu. You will need to enter password to access main menu. To press “◄” “►” to move digit, and to press ”▲” “▼” to select number. To press ”ENTER” button to confirm password.
Ex.: Password : 0000 (Default : 0000)
After keying in correct password, and confirm by
pressing ”ENTER” button, screen will show following
options. |
|
Timer | Scheduling Record |
Record | Record Mode Setup |
Alarm | Alarm Mode Setup |
Remote | Remote Control Setup |
System | System Setup |
Event | Event List |
Password : 0000
(Menu)
►Timer Record Alarm Remote System Event
25