CBC ZR-DH921NP manual Use Time Server, Master, Use Clock Adjust, Time Zone, Daylight Savings

•Use Time Server

Select this option for automatic time synchronization to occur over the TCP/IP network using the Time Server (SNTP).

•Master

Select this option if the DVR will act as the time server for other DVRs on the TCP/IP network.

•Use Clock Adjust

Select this option for automatic time synchronization via PORT A (RS-422). Then choose whether this DVR will act as the master or slave.

•Time Server

Choose either public or private time server. For most cases select public. The DVR will obtain the average time among 5 public servers (rime.nist.gov, time-a.nist.gov, time-b.nist.gov, ntp.nasa.gov and clock.isc.org). Then specify how often the time is synchronized in minutes. If there is a specific time server then select private and enter its host name or IP address.

•Time Zone

Select the time zone for the locale.

•Daylight Savings

Specify whether to use daylight saving time and the time period.

3. 6. 5 Password Administration

Access to the DVR can be controlled by setting up administrator and user passwords. One or more permissions can be assigned to each user depending on user tasks. Users

and passwords can be setup for accessing the DVR at the front panel as well as over the network.

•Use Password

Select this option to enable password. Enter the password for Administrator using the channel buttons 1 ~ 10(ZR-DH921NP : 1 ~ 9).

After enabling the password for the first time a unique Master Password is displayed. It is used in case the Administrator password is lost. Record this key as it is displayed only once.

20