Cisco Systems 8455dvb manual Prepare the PVR for Interactive TV, Before You Begin Overview

Prepare the PVR for Interactive TV

Before You Begin

Attention: Before you start the installation of the Cisco 8455DVB PVR, you must first complete the steps in the “Installatie Hoofdaansluiting Interactieve Televisie.”

Warning: Electric shock hazard. Unplug all electronic devices before connecting or disconnecting any device cables to the PVR.

Overview

Complete the following steps to prepare and activate the PVR for Interactive TV and you will soon be enjoying high-quality programming using the Cisco 8455DVB HD PVR.

1.Insert the smartcard into the front of the PVR.

2.Connect the PVR to your TV.

3.Prepare the PVR by entering your account information.

4.Customize the language settings.

5.Customize the PVR settings.

6.Set the audio and video formats.

7.Set the Parental Control PIN.

8.Programme the remote control to operate your TV (optional).

9.Enjoy using the PVR to watch and record your favourite shows.

Insert the Smartcard

When you purchased the PVR you should also have purchased a smartcard. The smartcard is necessary to operate the PVR.

1.Insert the smartcard into the front of the PVR with the chip side down.

2.Once inserted, do not remove the smartcard.

Tip: The PVR will not operate without the smartcard.

tv menu opnemen

CISCO 8455DVB

ME U L O

V

Z

E

N

D

E

R

T13632

Chip

(Insert this side down)

T13633

19