Prepare the Remote Control to Operate Your TV (Optional)
The remote control is preprogrammed to operate the PVR. If you want the PVR remote control to operate your TV also, you can programme the PVR remote control. In the TV Codes section of this guide, locate your TV brand and the associated code number. If there are several codes listed, begin with the first number and follow these instructions.
Tips:
•Find the
•Press the Mode key on the remote control to switch between operating the PVR and the TV.
•In TV mode, the remote can control TV volume and TV on/off.
Direct Programme Method
1.Turn on the TV.
2.Press the Mode key on the remote control until the red LED on the Power key flashes twice.
3.Within 5 seconds, enter the
•If the LED lights steadily for 2 seconds after you enter the TV code, there is a typing error.
4. | Point the remote control toward the TV and press |
|
| the Power key. |
|
| • The TV will go into |
|
| • If the TV does not go into |
|
| select a different code from the TV code list |
|
| and repeat steps 1 and 2. |
|
5. | Press the Mode key on the remote control until |
|
| the red LED on the Power key flashes twice. |
|
6. | Press 000 on the remote control to unlock your | T13735 |
|
TV code.
7.Test all the function keys on the remote control.
•If the function keys do not work correctly, repeat the process using a different TV code.
Tip: If this method does not work, use the All Code Scan Method to find out which code your remote control uses to operate your TV.
LED
23