DVD55RWi
SYSTEM SETUP
Channel Tuning
This unit is equipped with a TV tuner, by which you can receive TV signals. Before receiving TV signals, you must proceed with the tuning operation. The result of the operation will be saved and will not be lost after the unit is switched off.
Auto Scan channels
This operation can tune the unit automatically to receive TV programs.
Highlight the item "TUNER" in the System Setup Control Bar.
GNRL | PLAY | RECREC | LANGLANGTUNERTUNERCLOCK CLOCK |
Press the [SELECT] button and the TUNER menu will pop up, as shown in the following figure.
Highlight the item "Auto scan channels” and press the [SELECT], button to start channel scanning.
You can press the [STOP] button to stop the scanning during the operation. The channel information having been obtained during the scannng can also be saved.
GNRL | PLAY | RECREC | LANGLANGTUNERTUNERCLOCK CLOCK |
Start auto scan channel. |
| ||
|
|
| TUNER |
Auto scan channels: | SCAN | ||
Modify channel information
EDIT
Sort channel order
SORT
Tuner audio channel
Channel A
Note:
Before the channel scan operation , you must connect the system properly to ensure the TV signals can enter the system through the “TV TUNER input” . Please refer to “System
Modify Channel Information
Here, you can name the channel after the corresponding program’s name or any other name you like, sort the channel order to access the special channel easily, fine tune the channel and manual scan for channels.
Highlight the item "Modify channel information" in the "TUNER" menu, and press the [SELECT] button, the "Channel Edit" menu will pop up as shown in the opposite illustration:
SELECT to modify, CH+/CH- to shift channel,0~9 to jump channel
| Channel Edit | |||
Channel No. & name |
| P089/CH089 | ||
Frequency |
| 46.25MHz | ||
|
|
|
|
|
Tvsystem |
| PAL I | ||
|
|
|
|
|
Nicam |
| On | ||
|
|
|
|
|
Skip |
| Yes | ||
Fine tune |
|
|
|
|
|
|
|
| |
OK
Select the desired channel to be modified by pressing the [CH+] /
45.