DVD55RWi
SYSTEM SETUP
Progressive /Interlace Setup
In the general setup menu, use the [
],[
] buttons to select the “progressive/Interlace” item and press [SELECT] button, then a
Select "Progressive" or "Interlace” Press the [SELECT] button to fulfill the progressive/Interlace switch
Pressing the [IS/PS] button can proceed the progressive/Interlace switch too.
The value of this setting must accord with the scanning mode of the TV, otherwise the TV screen will display nothing.
If nothing is shown on the TV screen, you can try pressing the [IS/PS] button.
GNRL | PLAY | RECREC | LANGLANGTUNERTUNERCLOCK CLOCK |
General Setup
Screen saver | ON |
|
Progressive/Interlace | Interlace | ||
|
|
| Progressive |
Video output |
| RGBInterlacePAL | |
Video output format | PAL | ||
Restore | factory | settings | OK |
Video Output Setup
In the general setup menu, highlight the "Video output", then press the [SELECT] button. A
Select "YCbCr" or "RGB" in the list
When using the component video output, please select "YCbCr".
When using the SCART output please select the "RGB".
This setup does not affect the composite video output.
Press the [SELECT button to confirm.
GNRL | PLAY | RECREC | LANGLANGTUNERTUNERCLOCK CLOCK |
General | Setup |
| |||
Screen saver |
|
|
|
|
|
| ON |
|
| ||
Progressive/Interlace |
|
|
|
| |
| Interlace |
|
| ||
Video | output | RGB |
| YCbCr |
Video output format | RGB |
Restore factory settings | OK |
Video output Format setup
This unit has two video output systems: PAL and NTSC. You can select one of them according to your TV set specs.
Highlight the “Video output format” in the general setup menu and press the [SELECT] button.
GNRL | PLAY | RECREC | LANG | TUNER | CLOCK | ||
GNRL |
| LANG | TUNER | CLOCK | |||
A
You can switch the TV output format by pressing the [PAL/NTSC] button too.
General Setup
Screen saver | ON |
|
|
Progressive/Interlace | Interlace |
Video output | RGB |
Video output format | PAL |
|
Select the correct option according to factual requirements
Restore factory settings
NTSC
PAL
Press the [SELECT] button and the system will switch the output format to selected video output.
Restore Factory Settings
Select the “Restore factory setting” by the [
],[
] buttons in the general setup menu, press the [SELECT] button then the OSD displays:
Restore factory settings
System will reset all the setup items to
default value, OK to confirm, Cancel to
discard
OK
Highlight “OK” in the menu by using the [ 
],[ 
] buttons.
Cancel
Press the [SELECT] button to make all setup items restore the factory settings.
37.