Sony LBT-G1300 manual Specifications

Page 25

Specifications

For the U.S. model

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

With 6 ohm loads, both channels driven, from 70 – 20,000 Hz; rated 32 watts per channel minimum RMS power, with no more than 0.9

%total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

Continuous RMS power output

40 + 40 watts

(6 ohms at 1 kHz, 10% THD)

Music power output (North American model only)

	75 + 75 W
Peak music power output (except for North
American model)	550 W
Inputs	PHONO: 4.4 mV
Outputs	PHONES (stereo phone
	jack): accepts
	headphones of 8 ohms or
	more.
	SPEAKER: accepts
	impedance of 6 to
	16 ohms.

CD player section

System	Compact disc and digital
	audio system
Laser	Semiconductor laser
	(λ=780 – 790 nm)
	Emission duration:
	continuous
Laser output	Max. 400µW*
	*This output is the value
	measured at a distance of
	200 mm from the
	objective lens surface on
	the Optical Pick-up Block
	with 7 mm aperture.
Frequency response	40 Hz – 16 kHz (±0.5 dB)

Tape player section

Recording system	4-track 2-channel stereo
Frequency response	60 – 13,000 Hz (±3 dB),
	using Sony TYPE I
	cassette
Wow and flutter	0.1% WRMS ±0.3% (DIN)

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section

Tuning range	87.5 – 108.0 MHz
Aerial	FM wire aerial
Aerial terminals	75 ohm unbalanced
Intermediate frequency	10.7 MHz

AM tuner section

Tuning range	North American and
	Mexican models: 530 –
	1,710kHz (with the
	tuning interval set at
	10 kHz)
	Australian models: 531 –
	1,602 kHz (with the
	tuning interval set at
	9 kHz)
	Other models: 531 –
	1,602 kHz (with the
	tuning interval set at
	9 kHz)
	530 – 1,710 kHz (with the
	tuning interval set at
	10 kHz)
Aerial	AM loop aerial
	External aerial terminals
Intermediate frequency	450 kHz

Speaker

SS-G1300
Speaker system	2-way, bass-reflex type
Speaker units
Woofer:	13 cm dia., cone type
Tweeter:	2 cm dia., PIEZO type
Nominal impedance	8 ohms
Dimensions:	Approx. 240 x 420 x
	202 mm (9.5 x 16.5 x 8 in)
	(w/h/d) incl. projecting
	parts and controls
Mass:	Approx. 3.1 kg (7 lb 1 oz)
	net per speaker

continued

25

LBT-G1/LBT-G1300. 3-859-546-52. EN

Image 25

Contents Compact-Hi-Fi Stereo System Information TableofContents Connect the speakers HookingupthesystemConnect the AC power cord to a wall outlet Settingthe timeConnect the FM/AM antennas Inserting two R03 size AAA batteries into the remoteSetting the time Presetting RadiostationsTo check the clock when the power is on To light up the displayTo tune in a station with a weak signal Connectingoptional AVcomponentsand outdoorantennasTo change the preset number To listen to the sound of a turntableFM antenna Connecting optional AV components and outdoor antennasAM antenna Press ¤and place a CD on the disc tray PlayingaCDPress áP Basic OperationsPress p6 and insert a blank tape into deck a RecordingaCDPress ¤ and insert a CD on the disc tray Press ¤Press Preset + or to tune in the desired preset station Preset TuningTo listen to non-preset radio stations ListeningtotheradioPress r Recording from the radioPress p6 and insert a recorded tape Deck a or B Playing a tapePress Tape Press á3 5 2 RecordingfromatapeDubbing Press Pon deck a Press r on deck aPlayingtheCDtracks repeatedly To cancel Repeat PlayRepeat Play PlayingtheCDtracks inrandomorder To cancel Shuffle PlayProgrammingtheCD tracks Shuffle PlayPlayingonlythe beginningofeachtrack To cancel music scanPress ±or -0 to select a track Music ScanRecordingaCDby specifyingtrackorder To cancel Program EditProgram Edit SelectingthePreset Equalizermenu AdjustingthesoundTo select the sound characteristic To cancel the Preset EqualizerWake-up Timer Sleep TimerFallingasleeptomusic WakinguptomusicPress Power to turn off the power Press Timer ModeTo check the setting To cancel the timer operationPrecautions Cleaning the tape heads TroubleshootingDemagnetizing the tape heads Troubleshooting Specifications General SpecificationsDbfb IndexLBT-G1/LBT-G1300 -859-546-52. EN