Sony LBT-G1300 Connectingoptional AVcomponentsand outdoorantennas, To change the preset number

Page 7

4 Press PRESET + or – and select the preset number you want.

Preset number

TUNED		PRESET EQ

FLAT ROCK POPS JAZZ

MHz

5 Press MEMORY.

The station is stored.

6 Repeat steps 1 to 5 to store other stations.

To tune in a station with a weak signal

Press )± or -0 repeatedly to tune in the station.

To change the preset number

Start again from step 1.

To change the AM tuning interval (except for North American, Mexican, Australian and Middle Eastern models)

The AM tuning interval is factory-preset to 9 kHz (10 kHz in some areas). To change the AM tuning interval, turn off the power and change the position of the AM TUNING STEP switch on the rear panel to 10 kHz (or 9 kHz). Then turn the power back on. To reset the interval, repeat the same procedure.

Tip

The preset stations are retained for a week even if you pull out the AC power cord or if a power failure occurs.

Connectingoptional AVcomponentsand outdoorantennas

Connecting a turntable

To enhance your system, you can connect a turntable. Refer to the instructions of each component.

Make sure to match the colour of the plugs and the connectors.

To the audio output of a turn table.

To listen to the sound of a turntable

Press PHONO.

“Phono” appears in the display.

Tip

You can record the turntable sound.

continued

7

LBT-G1/LBT-G1300. 3-859-546-53. EN

Image 7

Contents Compact-Hi-Fi Stereo System Information TableofContents Connect the speakers HookingupthesystemInserting two R03 size AAA batteries into the remote Settingthe timeConnect the AC power cord to a wall outlet Connect the FM/AM antennasTo light up the display Presetting RadiostationsSetting the time To check the clock when the power is onTo listen to the sound of a turntable Connectingoptional AVcomponentsand outdoorantennasTo tune in a station with a weak signal To change the preset numberFM antenna Connecting optional AV components and outdoor antennasAM antenna Basic Operations PlayingaCDPress ¤and place a CD on the disc tray Press áPPress ¤ RecordingaCDPress p6 and insert a blank tape into deck a Press ¤ and insert a CD on the disc trayListeningtotheradio Preset TuningPress Preset + or to tune in the desired preset station To listen to non-preset radio stationsPress r Recording from the radioPress á Playing a tapePress p6 and insert a recorded tape Deck a or B Press TapePress Pon deck a Press r on deck a Recordingfromatape3 5 2 DubbingPlayingtheCDtracks repeatedly To cancel Repeat PlayRepeat Play Shuffle Play To cancel Shuffle PlayPlayingtheCDtracks inrandomorder ProgrammingtheCD tracksMusic Scan To cancel music scanPlayingonlythe beginningofeachtrack Press ±or -0 to select a trackRecordingaCDby specifyingtrackorder To cancel Program EditProgram Edit To cancel the Preset Equalizer AdjustingthesoundSelectingthePreset Equalizermenu To select the sound characteristicWakinguptomusic Sleep TimerWake-up Timer FallingasleeptomusicTo cancel the timer operation Press Timer ModePress Power to turn off the power To check the settingPrecautions Cleaning the tape heads TroubleshootingDemagnetizing the tape heads Troubleshooting Specifications General SpecificationsDbfb IndexLBT-G1/LBT-G1300 -859-546-52. EN