DVR4C Installation Manual Menu system
EN 18
>> MONITOR SETUP
>>> DISPLAY CAMERA WITH MOTION
•Select if the DVR switches automatically to a full screen image of the camera when motion is detected on that camera.
•With multiple motion detections shortly after each other, the last camera where motion was detected is used for display.
>>>DISPLAY CAMERA WITH INPUT ALARM
• Select if the DVR switches automatically to a full screen image of the camera when an input alarm becomes active for that camera.
• In case of multiple input alarms shortly after each other, the last input alarm is used for display.
>>>DISPLAY DWELL TIME
•Specify the dwell time for displaying the camera with an input alarm or motion. The interval can be configured with a slider from 5 to 10 seconds.
•If Follows is selected, the camera of the channel in alarm or with motion is shown for as long as the alarm is present or motion is detected.
>>> SEQUENCE DWELL TIME
•Specify the sequence dwell time that is used when the SEQ key is pressed.
•The interval can be configured with a slider from Off (disable) to 60 seconds (default 10 seconds).
>>> EXIT PLAYBACK ON EVENT
•When set to On, the DVR exits playback to display a live event.
>> SECURITY
>>> LOCAL PASSWORDS
•Set a local user password to allow a user limited access rights only for monitoring, monitoring control (Auto Seq., digital zoom), copy and playback control. Configuration is not allowed.
•A password consists of 4 digits
•To confirm the input, the user has to enter the same password again.
•The configured password is only valid for local users. The password is shown in the menu using * characters.
•If a password is set, a user without the correct password can only view live video and switch between full screen or quad views.
•Set a local administrator password. An administrator is allowed to enter all menus and configure all settings.
•A password consists of 4 digits
•To confirm the input, the administrator has to enter the same password again.
•The configured password is only valid for the local administrator. The password is shown in the menu using * characters.
•To lock the keys on the front of the DVR, set keylock to On and enter a
Bosch Security Systems Version 1.1