VGA SETUP
VGA SETUP |
|
> RESOLUTION | 1024 ^ 768 |
REFRESH RATE | 60HZ |
PRESS (< , >), THEN(SELECT)
PRESS (MENU) TO EXIT
Set RESOLUTION and REFRESH RATE based on the supported display mode and refresh rate of the VGA monitor that is connected to the DVR unit. Different monitors support different refresh rates:
Resolution | Refresh Rate Frequency (Hz) |
640 x 480 | 60, 72, 75, 85 |
800 x 600 | 60, 72, 75, 85 |
1024 x 768 | 60, 70, 75, 85 |
1280 x 1024 | 60 |
Note: The best refresh rate for LCD monitor is 60Hz.
MOTION SETUP
MOTION SETUP |
|
>MOTION CAMERA | _ _ _ _ |
MOTION SENSITIVITY | 01 |
MOTION RECORD TIME | 05 |
PRESS (< , >), THEN(SELECT)
PRESS (MENU) TO EXIT
To change MOTION CAMERA,
1. Press or to move the arrowhead cursor to MOTION CAMERA in
the menu.
2.Press the channel buttons to select cameras that you want to setup.
19
To setup all camera, press 
. You will see the screen shows MOTION CAMERA 1 2 3 4. Press the same button again to cancel the setting.
To setup channel 1 and 4 only, press 
. You will see the screen
shows MOTION CAMERA 1 4.Press the same buttons again to cancel the setting.
To setup channel 2 and 3 only, press 
. You will see the screen shows MOTION CAMERA 2 3 . Press the same buttons again to cancel the setting.
To adjust MOTION SENSIVITY,
1. Press or to move the arrowhead cursor to MOTION
SENSITIVITY in the menu.
2.Press the SELECT button repeatedly to cycle through the numbers. The sensitivity level ranges from 1 to 10. Level 1 is the least sensitive one and Level 10 is the most sensitive one.
To setup the Motion Time,
1. Press or to move the arrowhead cursor to MOTION TIME in the
menu.
2.Press the SELECT button repeatedly to cycle through the numbers. The time setting ranges from 5 to 30 seconds. Stop pressing the button when reach the desired numbers.
20