Hard Drive Setup, Sensor Setup | AVerMedia Technologies EB1004 BAK

HARD DRIVE SETUP

> OVERWRITE ENABLED	YES
MASTER HDD SIZE	80072MB
MASTER HDD USED	16014MB 20%
MASTER HDD FORMAT
SLAVE HDD SIZE	N/A
SLAVE HDD USED	N/A
SLAVE HDD FORMAT

PRESS (< , >), THEN(SELECT)

PRESS (MENU) TO EXIT

OVERWRITE ENABLED

This allows old video recordings on the hard drive(s) to be automatically overwritten with new recordings when hard drive space is full.

Press the SELECT button to enable or disable this feature (i.e., choose YES or NO).

MASTER HDD SIZE and MASTER HDD USED

These items show the MASTER hard drive capacity and the amount of disk space that has been used up by the video recordings.

MASTER HDD FORMAT

Press the SELECT button on this menu item to reformat the MASTER hard drive. You will then be prompted to enter the password. If an invalid password is entered, you will not be allowed to format the hard drive.

Note: All recordings on the MASTER hard drive will be deleted when you reformat the hard drive.

SLAVE HDD SIZE and SLAVE HDD USED

These items show the SLAVE hard drive capacity and the amount of disk space that has been used up by the video recordings.

SLAVE HDD FORMAT

Press the SELECT button on this menu item to reformat the SLAVE hard drive. You will then be prompted to enter the password. If an invalid password is entered, you will not be allowed to format the hard drive.

Note: All recordings on the SLAVE hard drive will be deleted when you reformat the hard drive.

SENSOR SETUP

SENSOR SETUP
> SENSOR RECORD TIME		15
ALARM OUT TIME		05
CHANNEL 1	NORMAL-CLOSE
CHANNEL 2	NORMAL-OPEN
CHANNEL 3	NOT INSTALLED
CHANNEL 4	NOT INSTALLED

PRESS (< , >), THEN(SELECT)

PRESS (MENU) TO EXIT

SENSOR RECORD TIME

This determines the duration of sensor recording (in minutes) in the event that the sensor devices detect an event. There are seven selections to choose from.

ALARM OUT TIME

This determines the duration of sound (in minutes) that is set off when the alarm device is triggered.

CHANNEL1 ~ CHANNEL4

These correspond to the four sets of sensor inputs on the DVR unit. Customize these according to the initial state of the attached sensor devices. There are three states to choose from:

NOT INSTALLED : Indicates that the channel does not have a sensor device connected.

NORMAL-OPEN : Indicates that the initial state of the sensor device is Normal-Open. When the sensor device detects an event and its state changes to Normal-Close, video recording is initiated.

NORMAL-CLOSE : Indicates that the initial state of the sensor device is Normal-Close. When the sensor device detects an event and its state changes to Normal-Open, video recording is initiated.