SVAT Electronics CV0104DVR instruction manual Dhcp

Page 40

SVAT ELECTRONICS

Now You Can See

6.4.3.2 DHCP

The “DHCP” is automatically set as the default network setting of the Network DVR. When a Network DVR is connected into the LAN, it will issue DHCP packets to request an IP address that is dynamically assigned by the DHCP server. If it is unable to get a DHCP address, the Network DVR will assign a default IP address such as “169.254.1.13”.

6.4.3.3CONNECT TO ADSL BY PPPoE MODE To setup follow the steps below:

1.After setup, rebooting enables automatic connection to ADSL.

2.Enter the “Username” and “Password” fields with the account and password provided by the ISP.

3.If item “Send mail after connected” is selected, the mail will be automatically sent when connected to the ISP.

4.Click “OK” button to save the settings.

Note: In order to activate the function, it is necessary to reboot the device after the setup.

ADSL Setting Display

If the Network DVR and ADSL modem are connected by a hub, the user can select “Dial On Power Up” to perform the connect operation. However, if the Network DVR and ADSL modem are connected directly, then please note the following steps below.

1.Power off Network DVR.

2.Connect Network DVR directly to the ADSL modem (using RJ-45 Ethernet port).

3.Power-up Network DVR.

4.Network DVR will start dialing.

5.Once connected, mail the IP address information to the preset e-mail address.

6.After 10 times of connection failure, it aborts the operation and the user can reconnect it by LAN to find the cause.

CV0104DVR

37

Image 40

Contents Web Ready 4 Channel DVR Now You Can See Product Warranty & Registration Products warranty registrationTable of Contents Safety Precautions Do not expose to extreme temperaturesNever keep the product to direct strong light Do not spill liquid of any kind on the productFeatures IntroductionInstallation Connectors on the Rear PanelFront Panel Name and Function of Each PartRear Panel Operating Procedure Powering onMonitoring Mode Record ModePlayback Mode Master HDD Timer Record a Alarm Record M MIX RecordSystem Setup MenuSystem Setup Time Setup Password Setup Change Password Password ChangedLoad Default Language Setup Camera Setup CH1 Title CAMERA1Now You Can See Record Setup Record Mode TIME+MOTIONBuzzer Setup Event List Time Search Event Search Hard Drive Setup Format Network DVR Setup Network Remote Control OptionalOnline with Dhcp Server Connecting Network DVR Online Without Dhcp Server Static IPOnline Using Adsl Pppoe Router Online UsingOnline Using Ddns Server Recommended Online Connection Now You Can See Change ActiveX settings to the ones seen above Now You Can See Main Display Live DisplayImage Recording Quality Setting DVR Control SetupSave Current Picture Configuration for Advanced Users Resolution SettingAdvanced Settings System SettingUser Setting User Authorization SettingNEW User / Change Password Network SettingDelete User Fixed IPDhcp Ddns Setting Recommended Firmware Update Now You Can See Troubleshooting Problem SolutionOverwrite Glossary Belkin Router Port Forwarding Your Router for USE with a Network DVRStep Lynksys Wireless Router Link RouterPort forwarding is now complete Linksys Wired RouterStep Select the Applications and Gaming tab Westell Router Netgear RouterStep Select the Yes, enter expert mode button Netopia RouterMotorola Router Wire Router Protocol selection, select TCPDVR Specifications Operating Environment Arlington, Texas Box Svat Supports Crime StoppersCrime Stoppers International Now You Can See Now You Can See Disclaimer