SVAT Electronics CV0104DVR instruction manual Installation, Connectors on the Rear Panel

Page 7

SVAT ELECTRONICS

Now You Can See

2. INSTALLATION

CONNECTORS ON THE REAR PANEL

Please setup the connection by following the illustration shown below (detailed instructions on using the network function can be found in Section 9):

1)Plug the power cord into your DVR and plug it into an outlet. SVAT recommends plugging it into a surge protected power bar for your device's protection.

2)Plug the BNC Connectors into each video input you plan on using. For

example, if you are using 3 cameras with this system, then plug BNC convertors into inputs 1-3. Plug BNC convertor into the video output as well.

3)Plug your camera(s) into the video input jacks using the 60ft extension wires.

4)Use an RCA wire to connect your television to the video output of the DVR. Make sure the RCA wire is plugged into the video input of your television. Note: This system does not support audio, so if you are using an audio/video RCA wire, there is no need to plug in the red or white inputs. On your television switch to the video/audio input channel

5)Your system is now installed and ready for use.

CV0104DVR

4

Image 7

Contents Web Ready 4 Channel DVR Now You Can See Products warranty registration Product Warranty & RegistrationTable of Contents Do not spill liquid of any kind on the product Safety PrecautionsDo not expose to extreme temperatures Never keep the product to direct strong lightIntroduction FeaturesConnectors on the Rear Panel InstallationFront Panel Name and Function of Each PartRear Panel Record Mode Operating ProcedurePowering on Monitoring ModeMaster HDD Timer Record a Alarm Record M MIX Record Playback ModeMenu System SetupSystem Setup Time Setup Password Setup Password Changed Change PasswordLoad Default Language Setup CH1 Title CAMERA1 Camera SetupNow You Can See Record Setup TIME+MOTION Record ModeBuzzer Setup Event List Time Search Event Search Hard Drive Setup Format Network DVR Setup Network Remote Control OptionalOnline with Dhcp Server Online Without Dhcp Server Static IP Connecting Network DVROnline Using Adsl Pppoe Router Online UsingOnline Using Ddns Server Recommended Online Connection Now You Can See Change ActiveX settings to the ones seen above Now You Can See Live Display Main DisplayImage Recording Quality Setting DVR Control SetupSave Current Picture System Setting Configuration for Advanced UsersResolution Setting Advanced SettingsUser Authorization Setting User SettingFixed IP NEW User / Change PasswordNetwork Setting Delete UserDhcp Ddns Setting Recommended Firmware Update Now You Can See Problem Solution TroubleshootingOverwrite Glossary Belkin Router Port Forwarding Your Router for USE with a Network DVRStep Link Router Lynksys Wireless RouterPort forwarding is now complete Linksys Wired RouterStep Select the Applications and Gaming tab Netgear Router Westell RouterNetopia Router Step Select the Yes, enter expert mode buttonMotorola Router Protocol selection, select TCP Wire RouterDVR Specifications Operating Environment Svat Supports Crime Stoppers Arlington, Texas BoxCrime Stoppers International Now You Can See Now You Can See Disclaimer