Western Digital 4CH TRIPLEX specifications MUX screen, select Sensor to go to Sensor setup screen

SENSOR – Press button to set <ON> or <OFF>.

<ON>: Video will be recorded when the sensor is activated.

Please refer to “4-3-3-3. SENSOR Setup”.

MOTION – Press button to set <ON> or <OFF>.

<ON>: Video will be recorded when the motion is detected.

Please refer to “4-3-3-4. MOTION Setup”.

MANUAL - Press button to set <ON> or <OFF>

<ON>: Video will be recorded when the user press RECORD button.

CONTINUOUS - Press button to set <ON> or <OFF>

<ON>: Video will be ALWAYS recorded when DVR is in operation.

AUDIO – Move the cursor on the one of <1>, <2>, <3>, and <4> audio inputs and press SEL button to select the audio port that will be recorded. The selected audio channels will be highlighted in Yellow.

4-3-3-3. SENSOR Setup

In MUX screen, select SENSOR to go to SENSOR setup screen.

5 seconds of Pre-Record will be applied to all channels as default.

SENSOR NUMBER – Press button to select sensor that one want to set and link with recording channel.

TYPE - Press button to select the type of sensor to be activated

Select the right sensor type according to the type of installed sensor with DVR. NORMAL OPEN – Normal Open type sensor

NORMAL CLOSE – Normal Close type sensor

ALARM - Press button to select the port on which an alarm out is made

26