Western Digital 4CH TRIPLEX specifications HDD Jumper Setting

Page 65

6.Assemble the rack containing the hard disk into DVR while holding up the handle.

7.Have the rack fixed in using the key of the rack. Otherwise, “HDD INSTALLATION FAILURE” message will pop-up.

8.If the hard disk is not formatted and recognizable by DVR, an automatic formatting will be done when the power of DVR is turned on. The notice “FORMATING” will appear on the screen as shown below during formatting.

6-2. HDD Jumper Setting

DVR allows on one hard disk to be assembled into the REMOVEBLE HDD RACK and a new hard disk’s JUMPER SETTING should be set to either SINGLE or MASTER. All hard disks provide information needed for JUMPER SETTING on the hard disks’ exterior. Please beware that DVR will not run properly without a proper JUMPER SETTING.

Refer to the following homepages of major hard disk manufacturers of additional information on

JUMPER SETTING.

WESTERN DIGITAL: www.westerndigital.com

SEAGATE: www.seagate.com

HITACHI: www.hgst.com

MAXTER: www.maxter.com

65

Image 65

Contents User Guide Explanation of Symbols Safety PrecautionsTable of Contents Network Client Access Networking Search Page Features Front View Name, Function and ConnectionSensor LED Remote Control VHS Rear ViewPacking List SpecificationFactory Default MUX General Master Live Initial menuChannel Rotation Channel InfoAlphablending Record Select Recording Mode QUAD, MUX, ScheduleQuad Recording Mode General Setup Sensor Setup Motion Detection Setup MUX Recording Mode Channel Setup MUX screen, select Sensor to go to Sensor setup screen Motion Detection Setup Applied Function with Respect to the Cursor’s Location Schedule Recording ModeMapping Recording methods and Front Buttons System Admin PasswordDate Format User PasswordFactory Default Current Date GMT Area Current TimeDyalight Saving Page LOG InfoSite ID Captured Image SystemSend Mail IP Address Mailing Buzzer PTZ Client AccessLAN LAN -DHCP Dynamic Host Configuration ProtocolAdsl HDD Format Storage OverwriteAuto Erasing 30DAYS CD-RW Backup Available only in model with CD-RW5. S/W Upgrade W/ CD-RW Available only in model with CD-RW Power on Power ON/OFFPower OFF Quad Screen SetupOSD Icon on Live Screen Individual Full Screen SetupAuto Channel Rotation Show/Hide OSD Icon on Live Screen LED InformationRecording Page Playback buttons Search when DVR has two HDDViewing Captured Image Still Image Capturing, Viewing, and BackupCapturing Still Image Ptzf Operation Still image Backup in USB flash memory stickPtzf Page Ptzf Camera link to RS-485 Page Page Motion Detection Region Setup OSD position and Screen size AdjustmentAdjusting OSD Ceiling & Bottom Line Adjusting Screen sizePage Deleting Region Audio Setup and ConnectionAudio Playback RS-422/485 External Terminal InformationRS-232C Back up in CD Sensor InstallationPlayback Data in CD Installing HDD in removable HDD rack HDD InstallationHDD Jumper Setting Indicator HDD IndicatorNetwork Setup in DVR Network Client S/W Main FeaturesNetwork Access ON/OFF Computer System RequirementsFor LAN -DHCP Users For LAN UsersFor Adsl Dynamic IP address Users Network Client S/W Start Up Static IP Address Network Client S/W Installation and Start UpNetwork Client S/W Installation Network Client S/W Start Up Dynamic IP Address Site Search Setup Record SetupQuad Setting Schedule Setting CH1 / CH2 / CH3 / CH4 LiveNetwork Saving and Uploading Settings BackupButtons in Search menu SearchBack UP Video Backup during Live DisplayStill Image capture during Playback Video Backup during PlaybackStill Image capture during Live Display Downloading Still Images from DVR Backup through Time SettingConverting nsf CD backup format to avi format Networking by Web Browser Live Search Networking by Ddns Dynamic Domain Name Server Playback of local HDD in Network Client S/W