Night Owl Optics Zeus-DVR10, Zeus-DVR5, Digital Video Recorder manual User’s Manual

Page 25

User’s Manual

6.2.5Network Setup – Global Access (Connected through a Router or Firewall) To access the NETWORK SETUP menu, select Main Menu NETWORK to open the

NETWORK SETUP menu.

If you would like to access your DVR while you are outside of your home or office network,

please follow the instructions below to configure the NETWORK Setup of your DVR

Important Note: You will not be able to access your DVR if your DVR is connected behind two or more routers.

Important Note: If you are using a DSL modem, the modem must be set to “bridge mode”.

Important Note: We will not be able to help you set up the network configurations if you have a

RADIUS Server or Network Magic installed.

Note: Prior to changing the NETWORK Setup of your DVR, it is strongly recommended that you perform the following tasks:

1.Access the configuration page of your router or Firewall.

2.Reserve an IP Address in your router or firewall that is not used by other computers or devices connected to your internal network.

3.Make sure your router is configured properly for computer or devices outside of your local network to access your DVR through your router. To do so, please use the following method(s): NAT (Network Address Translation), Port Forwarding, DMZ (De-Military Zone), DDNS (Dynamic DNS). Please refer to your router or firewall user’s manual for reference. Note: Improper configuration on the router or firewall will prevent you from accessing your DVR from outside your network.

4.Write down the assigned IP Address of your DVR, Subnet Mask, IP Address of your Router (Gateway) of your DVR for future reference when configuring the DVR.

1.Select STATIC as the network TYPE.

2.Leave Media Port at 9000

3.Setup Web Port (leave at 80 but some ISPs block inbound traffic on port 80 to prevent web servers so if the DVR cannot be remotely accessed choose a different port number)

4.Enter the IP Address that you have reserved at the beginning of this section into this field to be the unique address of your DVR in your local network.

5.NETMASK: It is recommended to leave the Subnet mask as the default 255.255.255.0.

6.Set the GATEWAY to the IP Address of your router.

7.Set the DNS (Domain Name Server) Address to the IP Address of your router.

8.Leave the UPNP option at “Enable”. Click “APPLY” to save your changes

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Rev Table of Contents User’s Manual FCC Compliance Statement FCC Radiation NormSystem Requirements Package ContentsSafety Instruction Other Features： DVR FeaturesInstalling Hard Disk Drive User’s Manual Layout Buttons Marks Functions IndicatorsFront Panel Please refer to actual product for detail Physical Connection method Ports Rear Panel Please see actual product for detailPTZ Lock Remote ControlMouse Operation Connecting the Cameras Connecting the Power SupplyDVR Start UP 5.1 System Initialization Main InterfaceDVR Menu and Options Using the Virtual Keyboard Mouse OnlyMouse Only PTZ Main Menu PreviewRecording Functions Main MenuUser’s Manual Playback Click File List Network Setup Intranet Internal Access Dhcp Network Setup Global Access Connected Directly to ModemPPPoE Static IPUser’s Manual Viewing your NightOwl DVR over the Internet Upnp Port ForwardingAccessing the DVR through Internet Explorer Browser IE To Modify Internet Explorer controls Turn OFF Pop Up Blocker Mobile Phone and Tablet PC Access Mobile SetupUser’s Manual User’s Manual When accessing with an iPhone follow these procedures ASee file under Device application selection Using the Software User’s Manual User’s Manual Click Close button to exit the program Goto All Programs and select ApkInstaller User’s Manual To set up your cameras, select Main Menu  Mail SetupCamera Date Format Select YYYY/MM/DD, or SystemTo manage the installed Hard Disk, click Main Menu View Options LockPIP Mode Log-in to Net-Viewer NET-VIEWER ProgramMenu column Main Interface of Net-viewerNetwork RecordPlay Control PTZ Control Remote BackupMulti Player File format Warranty Toll Free User’s Manual
Top Page Image Contents