Night Owl Optics Digital Video Recorder Network Setup Global Access Connected Directly to Modem

Page 23

User’s Manual

6.2.4 Network Setup – Global Access (Connected Directly to Modem)

To access the NETWORK SETUP menu, select Main Menu NETWORK to open the NETWORK SETUP menu.

If you would like to access your DVR while you are outside of your home, please follow the instructions below to configure the NETWORK Setup page of your DVR

Important Note: If you are using a DSL modem, the modem must be set to “bridge mode”.

Important Note: We will not be able to help you set up the network configurations if you have a

RADIUS Server or Network Magic installed.

Note: Prior to changing the NETWORK Setup of your DVR, it is strongly recommended that

you perform the following tasks:

1.Find out from your Internet Service Provider (ISP) what kind of service you are using. Note: Your DVR supports these three common types of Internet Services: DHCP (Cable Modem), PPPoE (DSL Modem) and Static IP (Fiber Optics). Actual service type may vary, please ask your ISP for the exact service type.

2.Write down the: IP Address provided by your ISP (if your ISP is using Static IP), Subnet Mask, Gateway Address, DNS Address(es) provided by your ISP of your DVR for future reference when configuring the DVR.

DHCP

1.If your ISP uses DHCP networking, select DHCP network TYPE.

2.Leave Media Port at 9000

3.Setup Web Port (leave at 80 but some ISPs block inbound traffic on port 80 to prevent web servers so if the DVR cannot be remotely accessed choose a different port number)

4.Leave the UPNP option at “ON”. Click the “DDNS SETUP” Button.

5.You will need to apply for a Dynamic DNS account and register a Domain Name with one of the known DDNS provider. Enter your DDNS Provider’s HOST NAME, USERNAME, and PASSWORD in the DDNS SETUP page.

NOTE: If you would like a free DDNS account please visit www.nightowldvr.com

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Rev Table of Contents User’s Manual FCC Compliance Statement FCC Radiation NormSystem Requirements Package ContentsSafety Instruction Other Features： DVR FeaturesInstalling Hard Disk Drive User’s Manual Front Panel Please refer to actual product for detail Buttons Marks Functions IndicatorsLayout Physical Connection method Ports Rear Panel Please see actual product for detailPTZ Lock Remote ControlMouse Operation Connecting the Cameras Connecting the Power SupplyDVR Start UP 5.1 System Initialization Main InterfaceMouse Only Using the Virtual Keyboard Mouse OnlyDVR Menu and Options PTZ Main Menu PreviewRecording Functions Main MenuUser’s Manual Playback Click File List Network Setup Intranet Internal Access Dhcp Network Setup Global Access Connected Directly to ModemPPPoE Static IPUser’s Manual Viewing your NightOwl DVR over the Internet Upnp Port ForwardingAccessing the DVR through Internet Explorer Browser IE To Modify Internet Explorer controls Turn OFF Pop Up Blocker Mobile Phone and Tablet PC Access Mobile SetupUser’s Manual User’s Manual When accessing with an iPhone follow these procedures ASee file under Device application selection Using the Software User’s Manual User’s Manual Click Close button to exit the program Goto All Programs and select ApkInstaller User’s Manual Camera Mail SetupTo set up your cameras, select Main Menu  Date Format Select YYYY/MM/DD, or SystemTo manage the installed Hard Disk, click Main Menu View Options LockPIP Mode Log-in to Net-Viewer NET-VIEWER ProgramMenu column Main Interface of Net-viewerNetwork RecordPlay Control PTZ Control Remote BackupMulti Player File format Warranty Toll Free User’s Manual
Top Page Image Contents