User’s Manual
Purge All Event Data
Select the item to delete all event video from database.
Purge Event Before
The item is used to delete event video that recorded before a specific date. The default of this item is <2000/01/01>.
4.6Dome Control
In Live mode, user can press CHANNEL key to display the desired dome camera in full view. To enter Dome Control mode, press the DOME key and press channel key 2 to display the hint screen; to exit the Dome Control mode and back to live mode, press ESC or DOME.
To configure the dome controls settings, see the following sections.
4.6.1Dome Connection
Follow the steps to install dome camera.
•See section 2.4 Rear Panel Connections for
•Refer to the following figure. Connect the R+, R- terminals on the dome camera to the D+, D- terminals on the
31