Optiview MPEG-4 user manual Dome Protocol Setup, 3 RS485 Setup

User’s Manual

4.6.2Dome Protocol Setup

The Dome Protocol item lists the available dome protocols for communicating with dome cameras connected to the MPEG-4 DVR. From the Main menu, select <Camera Setup> and press ENTER. The following menu is displayed.

		Camera Setup
1.	Camera Select	CH1
2.	Dome Protocol	None
3. Dome ID		0
4.	Camera Title	NO
5.	Covert
6. Termination		NO
7.	Brightness	0
8.	Contrast	0
9.	Saturation	0
10. Hue		0

To configure dome protocol, select a camera first and set the communications protocol associated with dome camera using the Direction keys and ENTER. The available protocol includes <Pelco D>, <Pelco P>,

<AD422>, <Fastrax 2> and <None> (default).

NOTE: The settings become effective after saving the changes and exiting from the menu.

4.6.3RS485 Setup

MPEG-4 DVR controls the domes via RS-485 communication protocol. The RS-485 parameters in MPEG-4 DVR must be set to the same parameters as the protocol for RS-422 setup of the dome.

Users are allowed to change the RS-485 settings of the MPEG-4 DVR. Select <System Setup> in Main menu, then select <RS485 Setup> from the System Setup menu and press ENTER. The following menu is displayed.

		RS485 Setup
1	Unit ID	224
2	Baud Rate	9600
3	Bits	8
4	Stop	1
5	Parity	None

32