Havis-Shields PT-VIDEO-MDVR manual Mdvr

Page 12

NOTE 3:

In order to view programmable settings on PT-VIDEO monitor, you must use adaptor cables provided to connect MDVR video out to number 2, 3 or 4 camera inputs on the monitor.

(Cannot connect to camera 1 input.).

***If you have a four-camera system (PT-VIDEO-4) you must temporarily disconnect one of the cameras and attach the MDVR video out cable in order to view the recorder settings and data. After MDVR settings are confirmed, the camera must be reconnected.

(Leave this camera cable accessible for future MDVR programming) The MDVR Data will not be viewable on cab monitor, but it will be recorded and viewable when downloaded onto main computer system.

Optional GPS

MDVR

Main

MDVR

Harness

MDVR Video out to Monitor adaptor cable

# GSM70026

Camera input connectors

PT-VIDEO Monitor

Monitor

Main

Harness

RCA to RCA Harness

# GSM70024

6

Image 12

Contents PT-VIDEO-MDVR Contact Information Technical Support and Service Explanation of Graphical Symbols Important Safeguards Replacement Parts Page Mobile Digital Recorder Features Page See wiring details below Mdvr InstallationMdvr Ignittion / Power on Connection Mdvr Ignition Trigger Power on ControlMdvr Ignition Trigger Power OFF Control Mdvr Power Button Control Ignition Trigger OFFMdvr main Harness wire connections 25-pin connector RCA to RCA 6 foot Cable # GSM70024Mdvr Power Button Digital Recorder Front Panel OperationLeft Arrow Key mode dependant Basic Mdvr Operation Mdvr Menu Structure Mdvr Video Search MenuMdvr Main Menu Setup Menu Time Setup MenuField Action Default Advanced Setup Menu Title SetupTrigger Setup Switch Camera Stealth REC, Display OnlyRecord Setup RecordGPS Setup OFFSystem Info Field Action Default System Info MenuMdvr Password Menus Compact Flash File Structure Main Interface Connector Pin Dsub Pin # Function Back Panel ConnectionsCamera Power Connector Pin Molex Specifications Equipment Specifications