Maxtor SLD240 operation manual Rear View

Page 8

2.2 Rear View

25	26	27	28	29	31
	FROM MUX
VIDEO	MAIN MONITOR
		AUDIO		RS-485
				RS-485
	IN		IN
			ETHERNET		RS-232
			10/100		RS-232
			10/100
OUT			OUT
OUT
TO	TO				ALARM I/O		DC12V
MUX'S VCR IN	TO
	MONITOR
	MONITOR
32	33	34			35	37	38 36

VIDEO IN Connector: This BNC connector is used to connect the video output from a camera or a MUX

(multiplexer) to the DVR.

FROM MUX MAIN MONITOR Connector : This BNC connector is used to connect the live video output from a MUXto the DVR.

AUDIO IN Connector : This connector is used to connect the audio output from a camera, a MUX, or other audio device to the DVR.

ETHERNET 10/100 Connector: This is one standard RJ-45 connector for 10/100 Mbps Ethernet networks.

RS-485Port: The RS-485 communication ports function as connectors when two or more units are connected in series to expand the storage capacity.

RS-232Port: The RS-232 communication port functions as a connector to an external control device. Please refer to for more details.

VIDEO OUT Connector: This connector provides the unit’s composite video signal to a MUX.

MONITOR Connector : This connector provides the unit’s composite video or a MUX’s live signal if connected to a display device.

AUDIO OUT: This provides the unit’s audio signal to a speaker.

ALARM I/O: This is a 9-PIN D -SUB connector including SWITCH OUT, GROUND, ALARM OUT, DISK

FULL, RECORD IN, ALARM R ES ET, and ALARM IN for connecting with external devices. Please refer to the next section (2.3) for details.

Plug Inlet: The inlet connects to an external power supply. Connect a 12 Vdc UL Listed Class 2 or ITE LPS Power Supply.

Wire Catch: The wire catch secures the power cord and keeps it in place (so that it does not droop or

hang loosely).

Ground Screw:Screw used to ground the chassis.

7

Image 8

Contents

Installation Safety Precautions Table Of Contents Compatible Multiplexer Drives Overview Product FeaturesIntroduction Hard Disk Compartment Lock Front ViewHard Disk Drive Compartment Rec Indicator Disk IndicatorDisplay button Search buttonRear View No Connection Alarm In/OutThis Figure is from the Rear View Connecting with a Single Camera Connecting with a MultiplexerConnecting with a Quad Basic ConnectionMultiplexer Attaching AN External Device to the DVR Hard Disk Drive Installation System Information Quality Best NtscMUX OFF Size POSUpdating System Software Set up the REC Time Mode when a multiplexer is connected Configure Recording SettingsMultiplexer Setup Best HighStandard BasicManual Recording Timer RecordingRecord ing Operations Start END 0000-0000Alarm Recording PRE- Alarm OFFMain Alarm REC Enable REC Quality Best Audio OFF ALM Type ALM DurationDiagrams below Externally triggered RecordingPlayback Operations Play Back from the Oldest DataFast Forward/Reverse Search to Play Back a Particular Recorded VideoPlayBack Recorded Video from an HDD in the Mobile Rack Slow Forward/ReversePlay Back Picture-by-Picture Alarm list Search Search Full List Alarm List Time Search Thumbnail SD CardSearch Operations Full List Search2002 Time SearchThumbnail Search Alarm List Time Search Thumbnail SD Card SD Card SearchThumbnail Search Year Full ListAlarm Select Main Backup ALL to HD2 Data BackupMobile Rack HD Backup Operations Disk Setting Reformat HD2 Usage Communication Alarm DiskSystem Main Goto Disk Backup Alarm to HD2 Security Digital Card SD Card Backup Operations Backup the System setting info into SD CardSave all settings onto the SD card Archive Single imageClips into SD CardKey Lock Operation Main View Operation LOGEnter button Setup buttonPress to select the desired item or entry for setting REC Setting RecqualityAlarm Setting RecrateLive images may be interrupted at the time of Alarm-out REC QualityPRE- Alarm Clock / Timer SET REC Enable OFF Main Timer REC Enable Is used up Power On modeTimer REC ScheduleNET Enable OFF NET Dhcp NET IP SET FTP Setting Main RS232 RS485SET RS232 / RS485 ID RS-232REC Mode Alarm REC NetenableComm Setting FTP Setting Comm ID Enable REC Mode FTP Account FTP IPUser PathHD Backup Full Main Disk REFORMAT/CLEAR HD 1System Menu Backgnd SituationMAC 00 0c 0c 00 00 Bios Date Mar 10 Built-in Hard Disk IDE Hard Disk InstallationJumper settings of hard disk drives for the system Mobile Rack Page Page Main Timer REC Enable System DefaultMain Alarm REC Enable Clock / Timer NET Enable OFF NET Dhcp NET IP FTP Setting MainBackup Full Main Disk REFORMAT/CLEAR System SET RS232/ RS485 IDS.D Message D Message MeaningsNetwork Configuration Physical specification of RJ-45 cable for EthernetCable Connections Connect to a computerAll other Windows systems Setting the DVRConnect to a LAN Hub Intranet PIN no RJ-45 PIN configuration for LAN HubConnect to WAN Internet Configure Your DVR Network Settings Enable DVR Network FunctionEnable Dhcp Function Comm Setting Comm IDTCP/IP Communication Software Set IP AddressPage TCP/IP Installation TCP/IP Configuration Setting ?? Click Start ? Settings ? Control Panel ? NetworkConnection Testing ?? Click Start ? Programs ? MS-DOS PromptPage Point stops recording Previously recorded data remaining Index TableLists Network Viewer and Image Viewer Network ViewerIntroduction to Network Viewer DVR SLD240Install the Network Viewermanually Install the Network Viewer in your PCPhysical specification for Ethernet Wire Type View the DVR video from a remote PC Click to access the display page of the Network Viewer ??OKFunction Buttons Description View Single DVR/ MultiplexerFunction Buttons Description Change the Record & Timer Properties Via the Network Set the Alarm record settingsSet the record timer Set the regular record optionsArchive Images to the Computer Image Viewer Internet Browser Viewer Internet BrowserSetup RS-232 & RS-485 ProtocolValue of a specific front panel key Keys and signalsCommunication Protocol Jogl Command Types Compatible Multiplexer Drives Manufacturer Model Channels ColorsSpecifications Model Number SLD240