Maxtor SLD240 operation manual PRE- Alarm

Page 35

PRE- ALARM:

This option allows for images prior to alarm trigger to be recorded on the hard disk drive. When an alarm is triggered, the device will record the images prior to the alarm for 5 seconds.(20 fields/sec)

ON: Enables this function.

OFF: Disables this function.

NOTE: If the device is already under recording mode before alarm occurs, the pre-alarm recording will not take effect.

MOTION SETTING:

The motion detection function is convenient for people without an alarm trigger input, but also can used with an alarm trigger input at the same time. If this function is enabled, the object movement would trigger the alarm recording just like the outside trigger signal, such as a door switch. Before using the motion detection function, please turn the ENABLEoption as ON,and set the SENSITIVITY (1 ~ 5) to a suitable value.

NOTE: The MOTION ENABLEoption can not be activated when the MULTIPLEXER option ( in REC SETTING page ) is set to ON. The motion detection feature is for single camera use only.

MOTION SETTING

MOTION ENABLE

: ON

SENSITIVITY

: 3

REGION

: SET

MAIN PAGE

ENABLE MOTION DETECTION

MOTION ENABLE:

This option enables / disables the motion detection. ON: Enables the motion detection.

OFF: Disables the s motion detection.

SENSITIVITY:

This option allows users to set the motion sensitivity.

1 is the most sensitive setting. 5 is the least sensitive setting.

REGION

This option allows users to set the motion region.

SET MOTION REGION

( 30 , 30 ) – ( 90 , 70 )

34

Image 35
Contents Installation Safety Precautions Table Of Contents Compatible Multiplexer Drives Overview Product FeaturesIntroduction Hard Disk Compartment Lock Front ViewHard Disk Drive Compartment Search button Rec IndicatorDisk Indicator Display buttonRear View No Connection Alarm In/OutThis Figure is from the Rear View Basic Connection Connecting with a Single CameraConnecting with a Multiplexer Connecting with a QuadMultiplexer Attaching AN External Device to the DVR Hard Disk Drive Installation Size POS System InformationQuality Best Ntsc MUX OFFUpdating System Software Set up the REC Time Mode when a multiplexer is connected Configure Recording SettingsMultiplexer Setup Basic BestHigh StandardManual Recording Timer RecordingRecord ing Operations 0000-0000 Start ENDREC Quality Best Audio OFF ALM Type ALM Duration Alarm RecordingPRE- Alarm OFF Main Alarm REC EnableExternally triggered Recording Diagrams belowSearch to Play Back a Particular Recorded Video Playback OperationsPlay Back from the Oldest Data Fast Forward/ReversePlayBack Recorded Video from an HDD in the Mobile Rack Slow Forward/ReversePlay Back Picture-by-Picture Full List Search Alarm list SearchSearch Full List Alarm List Time Search Thumbnail SD Card Search Operations2002 Time SearchThumbnail Search Search Year Full List Alarm List Time Search Thumbnail SD CardSD Card Search ThumbnailAlarm Select Main Backup ALL to HD2 Data BackupMobile Rack HD Backup Operations Disk Setting Reformat HD2 Usage Communication Alarm DiskSystem Main Goto Disk Backup Alarm to HD2 Archive Single imageClips into SD Card Security Digital Card SD Card Backup OperationsBackup the System setting info into SD Card Save all settings onto the SD cardMain View Operation LOG Key Lock OperationEnter button Setup buttonPress to select the desired item or entry for setting Recquality REC SettingRecrate Alarm SettingREC Quality Live images may be interrupted at the time of Alarm-outPRE- Alarm REC Schedule Clock / Timer SET REC Enable OFF Main Timer REC EnableIs used up Power On mode TimerRS-232 NET Enable OFF NET Dhcp NET IP SET FTP Setting MainRS232 RS485 SET RS232 / RS485 IDREC Mode Alarm REC NetenableComm Setting FTP Setting Comm ID Enable Path REC ModeFTP Account FTP IP UserHD 1 HD Backup Full Main Disk REFORMAT/CLEARSystem Situation Menu BackgndMAC 00 0c 0c 00 00 Bios Date Mar 10 Built-in Hard Disk IDE Hard Disk InstallationJumper settings of hard disk drives for the system Mobile Rack Page Page Main Timer REC Enable System DefaultMain Alarm REC Enable Clock / Timer SET RS232/ RS485 ID NET Enable OFF NET Dhcp NET IPFTP Setting Main Backup Full Main Disk REFORMAT/CLEAR SystemD Message Meanings S.D MessageConnect to a computer Network ConfigurationPhysical specification of RJ-45 cable for Ethernet Cable ConnectionsAll other Windows systems Setting the DVRConnect to a LAN Hub Intranet PIN no RJ-45 PIN configuration for LAN HubConnect to WAN Internet Comm Setting Comm ID Configure Your DVR Network SettingsEnable DVR Network Function Enable Dhcp FunctionSet IP Address TCP/IP Communication SoftwarePage TCP/IP Installation ?? Click Start ? Settings ? Control Panel ? Network TCP/IP Configuration Setting?? Click Start ? Programs ? MS-DOS Prompt Connection TestingPage Point stops recording Previously recorded data remaining Index TableLists DVR SLD240 Network Viewer and Image ViewerNetwork Viewer Introduction to Network ViewerInstall the Network Viewermanually Install the Network Viewer in your PCPhysical specification for Ethernet Wire Type View the DVR video from a remote PC ??OK Click to access the display page of the Network ViewerView Single DVR/ Multiplexer Function Buttons DescriptionFunction Buttons Description Set the regular record options Change the Record & Timer Properties Via the NetworkSet the Alarm record settings Set the record timerArchive Images to the Computer Image Viewer Internet Browser Internet Browser ViewerRS-232 & RS-485 Protocol SetupValue of a specific front panel key Keys and signalsCommunication Protocol Jogl Command Types Manufacturer Model Channels Colors Compatible Multiplexer DrivesModel Number SLD240 Specifications

SLD240 specifications

The Maxtor SLD240 is a sophisticated solid-state drive (SSD) that epitomizes advanced storage technology and reliability. Designed primarily for consumers and professionals seeking enhanced performance in data-intensive environments, this SSD offers a blend of speed, durability, and efficiency.

One of the standout features of the Maxtor SLD240 is its impressive read and write speeds. Using a SATA III interface, it can deliver sequential read speeds of up to 550 MB/s and write speeds of up to 500 MB/s. This high-speed performance significantly reduces boot times, improves application loading times, and enhances overall system responsiveness, making it an ideal choice for both everyday users and gamers.

The SLD240 employs 3D NAND technology, which enables higher storage densities and improved performance compared to traditional 2D NAND. This cutting-edge technology also contributes to the SSD's durability, as it offers a greater resistance to data loss and wear over time. With a lifespan rated at approximately 1 million hours Mean Time Between Failures (MTBF), users can trust the SLD240 for their critical data storage needs.

Another notable characteristic of the Maxtor SLD240 is its power efficiency. Consuming less power than conventional hard drives, it produces less heat while maximizing energy savings. This not only extends battery life in laptops but also promotes a cooler operating environment in desktops and other systems.

The SSD is available in various storage capacities, catering to a wide range of storage requirements from casual users to professionals needing ample space for large files and applications. With capacities typically ranging from 240GB to 2TB, users can select the model that best fits their storage demands.

Security features are also integrated into the SLD240, including support for AES 256-bit encryption, ensuring that data remains secure against unauthorized access. The drive also boasts advanced error correction technologies, which enhance data integrity by mitigating the risk of data corruption.

In summary, the Maxtor SLD240 is a remarkable solid-state drive that combines speed, reliability, and security in a compact form factor. With its impressive performance metrics, advanced technologies, and robust data protection features, it stands out as an excellent choice for consumers and professionals looking to upgrade their storage solutions.