Philips VCA631AT, VCA431AT Automatic Channel Setup, You set up the channels again, VCA631 only

12 Automatic Channel Setup

Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets

you set up the channels again.

13-5

Press the VCR button.

2

Press the MENU button.

SELECT op CHOOSE B

→PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select TUNER SET UP, then press the F.FWD/B button.

SELECT op CHOOSE B
→ TV
CABLE TV	ON
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW		VCA631 only
TV STEREO	ON
2ND AUDIO
TO END PUSH EXIT

4

Press the PLAY/o button or the STOP/p button to select

TV (if you have an antenna) or CABLE TV (if you have a cable connection). Then, press the F.FWD/B button. ON will appear beside your choice.

1

2

5

Press the PLAY/o button or the STOP/p button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. The VCR will place all the channels you receive into its memory.

6

Wait for a few minutes while the VCR sets up the chan- nels. When this is complete, CHANNELS ARE SET will appear on the screen. Then the programming of the lowest channel number placed in the VCR’s memory will appear on the screen. Now when you press the CH(annel) o/p button, you will scan only through channels you receive.

Helpful Hints

•You can not enter the TUNER SET UP menu when you are in Line Input mode (channel 001 or 002). When you select channel 001 or 002, AV REAR or AV FRONT will appear on the screen briefly.

•You can not program channels if you are using a Cable Box or DBS.

•If you select TV at step 4, channels 2-69 will be available. If you select CABLE TV at step 4, channels 1- 125 will be available.