Philips VCA431AT, VCA631AT owner manual Helpful Hints cont’d

Page 53

Helpful Hints (cont’d) 53

The Number buttons won’t work for channels above 69.

•Select CABLE TV at the TUNER SET UP menu (page 12), then let the VCR set up the channels.

•Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter chan- nel numbers as a three-digit number. (See page 24 for details.)

TV programs cannot be watched normally.

•Put the VCR in TV position. (Press the VCR/TV button so that the VCR light disappears from the display panel. For details, see page 28.)

•Check the connections between the VCR, TV, antenna/cable, and Cable Box/Direct Broadcast System (if applicable). (See pages six - 10 for details.)

Tape cannot be inserted.

•Insert the tape, window side up, with the record tab facing you.

•Make sure a tape isn’t already in the VCR by pressing the STOP/EJECT button on the VCR.

•Gently push on the center of the tape when putting it in the VCR. Never force the tape into the VCR.

•If a timer recording is programmed and the VCR power is off, you can not insert a tape without a record tab.

Tape cannot be removed.

•Make sure the power plug is completely connected to a power outlet.

•You have set a timer recording. Turn the VCR power on, then eject the tape. Be sure to insert a tape and turn off the power for your timer recording.

VCR ejects the tape when the REC(ord)/OTR button is pressed or when the VCR power is turned off to set a timer recording.

•Make sure the tape has a record tab (page five).

Channels above 13 cannot be received.

•Select CABLE TV at the TUNER SET UP menu (page 12), then let the VCR set up the channels.

Poor reception

•You may need to tune your TV again.

The motor (cylinder) rotates even when the VCR is in Stop mode.

•To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The quick play mechanism allows the tape mechanism to switch from Stop mode to Play mode in one second.

Direct Broadcast System Hookups

•Watching one TV channel while recording another may not be possible if you have a DBS hookup. You may have to set your TV to channel 03 or 04, then make your channel selections at the DBS. (See page nine for details.)

•With many DBS hookups, if you use accessory audio and video cables to connect your VCR to your TV, you will have to put your VCR in Line Input mode (channel 001 or 002).

Line Input mode

•If you accidentally enter Line Input mode (AV FRONT or AV REAR will appear on your TV screen briefly), press the CH(annel) o/p button or use the Number buttons to select another channel.

Hi-Fi Stereo Sound (VCA631 only)

•During playback, Hi-Fi audio may temporarily revert to normal audio when you adjust tracking. This is normal.

•When connecting the VCR to a stereo TV, you will only get stereo sound if you use audio cables to con- nect the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on your TV, and if the TV is in Line (Auxiliary) Input mode.

•When you connect the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on your TV, the stereo light on the TV might not glow. But, as long as the status display indicates you are receiving a stereo sig- nal, you are receiving a stereo signal. This is normal.

•Only tapes recorded in Hi-Fi audio will play back in Hi-Fi audio. Tapes recorded in normal audio will play back in monaural audio.

Page 52 Page 54
Image 53
Page 52 Page 54
Contents VCA631AT VCA431AT For Customer Use Dear Philips Magnavox product ownerThis bolt of lightning indi- cates uninsulated material Model No Serial NoSafety Precautions FeaturesIntroduction Energy Star is a U.S. registered markTable of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups without a Cable Box/Direct Broadcast SystemPlug in the TV and the VCR Hookups without a Cable Box/Direct Broadcast System cont’dRecording/Viewing Any Channel Hookups with a Cable Box/Direct Broadcast SystemConnections TV’s Antenna in Jack Cable Box/DBS RF coaxial SignalRecording One Channel/Watching Another VCA431 Hookups with a Stereo TVVCA631 2Turn on the TV Turning on Your VCRPress the Menu button. The display shown below will appear You set up the channels again Automatic Channel SetupPress the VCR button Press the Menu button VCA631 onlyAdding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Automatic Channel Setup cont’dReviewing Memorized Channels Do each step within 60 seconds of the previous step Manual Clock SettingWill appear on the VCR display panel Setting the Clock cont’dPress the STATUS/EXIT button to start the clock. Press the VCR button, then press the Menu button Automatic Clock SettingTime Zone Daylight-Savings Time Language Selection Child Lock 2Find your 1&6 TV code Setting the Remote to Operate a TVYour code 2FindRemote Control Buttons REWind/ Button Remote Control Buttons cont’dCHannel o/p Button MenuStatus Display example only On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Timer LightVCR Light Cassette CompartmentFront Panel Audio OUT Jacks Rear PanelVideo in Jack OUT Jack1Turn on the TV 2Insert a tape in the VCR PlayingRead and follow the steps below to play a tape If the VCR light appears on the display panel, go to . If RecordingVCR light does not appear, press the VCR/TV button once RECord light will appearPress the STOP/p button to stop the recording Recording One Channel/Watching AnotherOne-Touch Recording Daily Timer RecordingTimer Recording cont’d Tape Speeds Press the STATUS/EXIT button. Program WAS COMChecking or Cancelling Timer Recordings Call Letters Setting Up the VCR Plus+ Programming SystemChannels Examine the lists on Setting Up the VCR Plus+ Programming System cont’dTimer Recording with the VCR Plus+ Programming System See page 52 for more hints Rerecording Tape Duplication Press the F.FWD/B button so that on appears beside Repeat PlayPress the PLAY/o button or the STOP/p button to select Real-Time Counter Memory Press the VCR button Press the Time Search button Time SearchForward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Understanding On-Screen Displays Multi-Channel Television Sound System VCA631 onlySpecifically… MonitorMulti-Channel Television Sound System VCA631 only cont’d Please see additional notes on Hi-Fi Stereo Sound System VCA631 onlyHi-Fi Stereo Sound System VCA631 only cont’d Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or GlossarySpecifications Model # Serial # Limited WarrantyPlease contact Philips at French Speaking English Speaking Index Page Page Supplied Accessories

VCA431AT, VCA631AT specifications

The Philips VCA631AT and VCA431AT are two advanced vacuum cleaner models that embody the brand's commitment to innovation, efficiency, and high performance. These vacuum cleaners are designed to tackle a variety of cleaning tasks, making them suitable for both domestic and commercial use.

The VCA631AT model is particularly noteworthy for its powerful suction capability, which is facilitated by its state-of-the-art motor technology. This motor ensures that every nook and cranny is reached, providing a deep clean that is essential for maintaining a dust-free environment. The vacuum is equipped with a multi-stage filtration system that captures 99.9% of dust particles, making it an excellent choice for allergy sufferers.

In terms of design, the VCA631AT is engineered with ergonomics in mind. Its lightweight construction allows for easy maneuverability, while its sleek design ensures that it can easily fit into storage spaces when not in use. The handle is designed for comfort, allowing users to clean for extended periods without discomfort.

On the other hand, the VCA431AT model is known for its compact design, making it perfect for smaller homes or apartments. Despite its compact form, it does not compromise on performance. It features a powerful suction system that is effective on both carpets and hard floors. The integrated brush roll technology adjusts automatically to different surfaces, ensuring optimal cleaning performance on a wide range of floor types.

Both models come with a variety of attachments that enhance their versatility. These include crevice tools for tight spaces, upholstery brushes for furniture cleaning, and specialized floor nozzles. The VCA431AT stands out with its innovative dust container, which can be emptied with one click, minimizing contact with debris and making maintenance easier.

A highlight of both vacuum cleaners is their noise reduction technology, allowing users to clean quietly, even during the night. The energy-efficient design further promotes sustainability, ensuring that these models consume less power without sacrificing performance.

In summary, the Philips VCA631AT and VCA431AT vacuum cleaners represent the pinnacle of cleaning technology, combining powerful suction, ergonomic design, and advanced filtration systems. Their unique features make them suitable for various cleaning needs, providing efficient solutions that uphold Philips' reputation for quality and reliability. Whether you choose the robust VCA631AT or the compact VCA431AT, both models offer an excellent cleaning experience tailored to modern lifestyles.
Top Page Image Contents