Philips VPA115AT owner manual Rear Panel, AC Power Cord CH3/CH4 Switch ANTenna OUT Jack

Rear Panel 15

AC Power Cord	CH3/CH4 Switch	ANT(enna) OUT Jack
Connect to a standard AC outlet		Use the supplied RF coaxial cable
to supply power to the VCP.	Set to channel 3 or 4 to	to connect this jack to the
Make sure the car battery cord is	use your TV with your	ANTENNA IN jack on your TV
disconnected from the VCP.	VCP. Details are on pages	or Cable Box.
	six-nine.	Details are on pages six-nine.

		ANT OUT
		CH3
	AUDIO	CH4
13.2V	OUTPUT	ANT IN
	VIDEO

AUDIO OUTPUT Jack	VIDEO OUTPUT Jack
Use an audio cable (not supplied) to
	Use a video cable (not supplied) to
connect this jack to the Audio In
	connect this jack to the Video In jack
jack of a TV, camcorder, VCR, or
	of a TV, camcorder, VCR, or moni-
audio system.
	tor. Details are on page 10.
Details are on page 10.

ANT(enna) IN Jack

13.2V Jack

Connect the car battery cord here when you use the VCP in your vehicle. Details are on page 11.

Connect your antenna or cable here. Details are on pages six-10.