Philips VPA115AT Hookups With a Cable Box, Watching TV with the VCP Off, Playing a Tape

Page 8

8 Hookups With a Cable Box

This connection allows you to view any channel. You must select channels at the Cable Box.

1.Connect the Cable signal to the IN Jack on the Cable Box.

IN
OUT
		ANT OUT
		CH3
	AUDIO	CH4
13.2V	OUTPUT	ANT IN
	VIDEO

3. Use a second RF coaxial cable to con- nect the ANT(enna) OUT jack on the

VCP to the TV’s	75Ω
	ANT	/
ANTENNA IN Jack.	CABLE

ANTENNA IN Jack

Back of TV (example only)

2.Use the RF coaxial cable (supplied) to connect the OUT Jack on the Cable Box to the ANT(enna) IN Jack on the VCP.

Watching TV with the VCP Off

1

Set the TV to the Cable Box output channel (channel 3 or 4).

2

Select the channel you want to watch at the Cable Box. You can not select channels at the TV.

Playing a Tape

1

Set the TV to channel 3 or 4, whichever channel the CH3/CH4 switch on the VCP is set to.

2

Press the PLAY button to play the tape.

Image 8

Contents VPA115AT Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions Table of Contents Before Using Your VCP Putting Batteries in the Remote ControlUsing the Remote Control VCR MaintenanceHookups Without a Cable Box Disconnect the antenna or cable from your TVYou are ready to turn on the VCP Hookups Without a Cable Box cont’dPlug in the TV and the VCP Hookups With a Cable Box Watching TV with the VCP OffPlaying a Tape VCP to the TV’sHookups With a Cable Box cont’d TV Antenna in JackHookups With a Stereo TV Helpful HintMobile Connections Remote Control Buttons Display Panel Front Panel AC Power Cord CH3/CH4 Switch ANTenna OUT Jack Rear PanelAudio Output Jack Video Output Jack ANTenna in Jack 13.2V JackPlaying Picture Control Playback OptionsRepeat Playback Viewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Automatic Operation Features Helpful Hints Renewed Glossary Specifications/GlossarySpecifications Index Supplied Accessories