Note
•• This product may not be compatible with certain types of USB storage device.
•• If you use a USB extension cable, USB HUB, or USB
•• Digital camera PTP protocols are not supported.
•• Do not remove the USB storage device while it is being read.
••
•• Support a USB port: 5V 
, 500mA.
Auto standby
When playing media from a connected device, the SoundBar automatically switches to standby if:
•no button is pressed for 30 minutes, and
•no audio play from a connected device.
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers.
What you need
• A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 2.1 + EDR.
• The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
1 Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode.
»»The Bluetooth indicator blinks at a fast rate.
2 On the Bluetooth device, switch on Bluetooth, search for and select Philips HTL2160 to start connection (see the
user manual of the Bluetooth device on how to enable Bluetooth).
•When prompted for a password, enter "0000".
»»During connection, the indicator blinks at a lower rate.
3 Wait unitl the Bluetooth connection is completed.
»»When the Bluetooth connection succeeds, and the Bluetooth indicator lights up.
»»If the connection fails, the Bluetooth indicator blinks continually at a lower rate.
4 Select and play audio files or music on your Bluetooth device.
• During play, if a call is coming, music play is paused. Play resumes when the call ends.
5 To exit Bluetooth, select other source.
•When your switch back to Bluetooth mode, Bluetooth connection remains active.
Note
•• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.
•• If you want to connect your SoundBar with another Bluetooth device, disable the currently connected Bluetooth device.
•• Philips does not guarantee 100% compatibility with all Bluetooth devices.
Apply factory settings
You can reset your SoundBar to the default settings programmed at the factory.
1 In mute mode, quickly press AUX twice.
»»The factory settings is restored.
EN 10