Philips VP115CAT owner manual Rear Panel

Rear Panel 15

CH3/CH4 Switch	AC Power Cord
Set to channel 3 or 4 to	Connect to a standard AC outlet	ANT(enna) IN Jack
use your TV with your	to supply power to the VCP.
		Connect your antenna, cable
VCP. Details are on pages	Make sure the car battery cord is
		signal, or RF coaxial cable here.
six-nine.	disconnected from the VCP.
		Details are on pages six-10.

		ANT IN
		CH3
	AUDIO	CH4
DC	OUTPUT
13.2V		ANT OUT
	VIDEO

AUDIO OUTPUT Jack	VIDEO OUTPUT Jack
Use an audio cable (not supplied) to
	Use a video cable (not supplied) to
connect this jack to the Audio In
	connect this jack to the Video In jack
jack of a TV, camcorder, VCR, or
	of a TV, camcorder, VCR, or moni-
audio system.
	tor. Details are on page 10.
Details are on page 10.
	ANT(enna) OUT Jack

DC 13.2V Jack

Use the supplied RF coaxial cable to connect this jack to the

Connect the car battery cord here

ANTENNA IN jack on your TV

when you use the VCP in your vehicle.

Details are on page 11.

or Cable Box.

Details are on pages six-nine.