Philips TS3259C1 manual Using the AUDIO/VIDEO Input Jacks CONT’D, Connect the S-VIDEO

Page 32

USING THE AUDIO/VIDEO INPUT JACKS (CONT’D)

S-VIDEO INPUT

The S(uper)-Video connection on the rear of the television can give you better picture detail and clarity for the playback of S-VHS VCR tapes or Digital Video Discs than the normal antenna picture connections.

Note: The VCR (or Digital Video Disc player) must have a S- VIDEO OUT(put) jack in order for you to complete the connec-

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel, to the last viewed channel, then the AV 1 connection, then the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel, to the last viewed channel, then the MM 1 (AV 1) con- nection, then the MM 2 (AV 2) con- nection.

When using the S-Video input jack remember that it will take prece- dence over any video signal coming from the Video IN-1 jack. The sig- nal from the S-Video jack can only be viewed on the AV 1 channel.

BACK OF TV

1

tions shown on this page.

BEGIN

Connect the S-VIDEO

CABLE to the S-VIDEO input jack on the rear of the television, then connect the AUDIO (red and white) cables to the AUDIO IN (IN 1) jacks on the rear of the TV.

Connect the S-VIDEO

CABLE to the S-VIDEO output jack on the accessory device. Then, connect the red and white AUDIO CABLES to the AUDIO

 

S-VIDEO CABLE

S-VIDEO

 

 

 

 

 

 

24

(NOT SUPPLIED)

VIDEO

 

 

 

 

 

 

 

 

L

 

 

 

ANT "A"

AUDIO

 

 

 

75

R/MONO

 

 

AV 1

 

 

IN-1

OUT

 

 

 

AUDIO IN

 

 

 

(RED/WHITE)

AV 2

VIDEO IN

 

 

2

 

 

 

 

(YELLOW)

 

 

 

ANT/CABLE

S-VIDEO

R

L

 

OUT

AUDIO OUT

 

OUT

 

 

 

 

BACK OF ACCESSORY

(left and right) output jacks on the rear of the accessory device.

Turn the VCR (or Digital

Video Disc Player) ON.

Press the AV button on the remote until you tune to the AV 1 channel. You are now ready to view the tape or disc on the TV.

4

 

 

 

3

 

 

 

 

 

SLEEP

 

 

POWER

 

 

 

 

TV

AV

STATUS/EXIT

CC

TV/VCR-CLOCK

VCR

VCR

INCREDIBLE

MULTI

A/CH

ACC

RECORD

STEREO

MEDIA

 

 

 

 

 

SMARTSMART

SOUNDPICTURE

MENUSURF

DBS, DVD, Video Game, etc.

(EQUIPPED WITH S-VIDEO AND

AUDIO OUTPUT JACKS)

IF YOU ARE USING A

NON-STEREO DEVICE,

USE ONLY THE AUDIO

R/MONO JACK.

SMART HELP

The S-VIDEO and IN-1 inputs are in parallel. The S- VIDEO input will take precedence when in use. If separate video sig- nals are connected to the S-Video and VIDEO IN-1 inputs, the signal

from the VIDEO IN-1 input will not be useable.

If you have added AV 1 to the TV’s channel memory, just press the CHANNEL + or – buttons until the AV 1 mode (channel) is selected.

VOL

CH

MUTE

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents TS3259C1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features Cable/AntennaAdjusting the TV Picture Press the STATUS/EXIT but Setting the TV’S ClockPress the Numbered buttons Activating the TV’S on Timer Control Selecting the TV’S on Timer Channel Press the STATUS/EXIT buttonSetting the TV’S on Timer Start Time Use the Cursor UP  or CURSOR Down buttons to set AM or Start up time. Refer to page 8 for Further detailsTurning on the on Timer Display Understanding Smartlock Movie RatingsSmartLock control Using Smartlock Setting UP the Access CodeEnter current access code Using Smartlock Blocking Channels Press the Channel + orPress the STATUS/EXIT but- ton to remove the menu Using Smartlock Movie RatingEnter the correct access code number. Xxxx shows on Using Smartlock TV Rating Using Smartlock Blocking OptionsUsing Smartlock Block Unrated Using Smartlock no Rating Reviewing the Smartlock Settings Example Blocking is set to OFFViewing Blocked Programming Turning on the Noise Reduction Control Interference and improve Quality of the pictureTurn the Contrast + feature on Or OFF Turning on the Contrast + ControlTrast + control Contrast + option areaUsing the Closed Caption Control ModeUsing the Sleep Timer Control Good BYE SleepPrograms Adjusting the Treble , Bass , and Balance Sound ControlsBalance may all be used to Adjust the sound playback of TV Setting the TV for Stereo and SAP Programs Remember, if stereo is not presentOn a selected show and the TV is Placed in the Stereo mode, the sound comUsing the Incredible Stereo Control Using the Volume BAR ControlSetting the Audio OUT Control Use the Cursor Left  or Right  buttons to setUsing the TV Speaker Control and Audio Output Jacks Using the AUDIO/VIDEO Input Jacks Connect the Video yellowUsing the AUDIO/VIDEO Input Jacks CONT’D Connect the S-VIDEOPress the Smart Picture Button repeatedly to select eitherUsing the Smartsound Control Press the Smart Sound butPress the Channel + or Press the Surf button onRead, the Surf List is EMPTY, Press to addSetting the Remote Control to Operate Accessory Devices Remote control number for yourPlace the TV/VCR/ACC Find your Three-Digit Code on pagesPlace the TV/VCR/ACC Press the VCR RecordPress the Smart Sound Enter the THREE-DIGITTurn on the device by press- ing the Power button on Search MethodRemote Control Direct Entry Codes Remote VCR Code noRemote Dvdcode no Using the REMOTE’S VCR Buttons Rewind ButtonTV Displays Wrong Channel or No Channels Above Tips if Something Isnt WorkingGlossary to Television Terms Index Philips Consumer Electronics Company Texas Page Limited Warranty
Top Page Image Contents