Philips TS3259C1 TV Displays Wrong Channel or No Channels Above, Tips if Something Isnt Working

Page 42

TIPS IF SOMETHING ISN'T WORKING

Please make these simple checks before calling for ser-

vice. These tips can save you time and money since charges for TV installation and adjustment of customer controls are not cov- ered under your warranty.

No Power

No Picture

No Sound

Remote Does Not Work

TV Displays Wrong

Channel or No

Channels Above 13

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen can cause picture tube damage. When your TV is continuously used with such a source, the pattern of the non-moving portion of the game (CDI, etc.) could leave an image permanently on the picture tube. When not in use, turn the video source OFF. Regularly alternate the use of such video sources with normal TV viewing.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again.

•Check that outlet is not on a wall switch. Be sure fuse is not blown on AC power strip.

•Check to be sure the system mode switch (TV/VCR/ACC) is in the correct position when using the remote control to power the set ON.

•Check antenna connections. Are they properly secured to the TV's ANT/CABLE plug?

•Check the TUNER control for CABLE or ANTENNA setting.

•Press the AV button on the remote to make sure the correct signal source is selected (AV 1, AV 2, SVID-R or MM 1, MM 2, MM 3).

•Check the VOLUME buttons.

•Check the MUTE button on the remote control.

•Check the SPEAKER on-screen control. OFF position will eliminate sound at the set.

•If attempting auxiliary equipment hookups, check audio jack connections.

•(If Applicable) Check Audio Receiver for correct operating mode.

•Check TV/VCR/ACC “System” switch on the remote. Move the switch to the TV position to operate the television.

•Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary.

•Clean the remote and the remote sensor window on the TV.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again. Be sure fuse is not blown on AC power strip.

•Check to be sure TV outlet is not on a wall switch.

•Repeat channel selection.

•Add desired channel numbers (CHANNEL EDIT control) into TV memory.

•Check to be sure the TUNER control is set to the CABLE option.

Cleaning and Care

•To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

•When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.

•Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean dry cloth to dry the wiped surfaces.

•Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents TS3259C1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features Cable/AntennaAdjusting the TV Picture Setting the TV’S Clock Press the Numbered buttonsPress the STATUS/EXIT but Activating the TV’S on Timer Control Selecting the TV’S on Timer Channel Press the STATUS/EXIT buttonSOR Down buttons to set AM or Setting the TV’S on Timer Start TimeUse the Cursor UP  or CUR Start up time. Refer to page 8 for Further detailsTurning on the on Timer Display Understanding Smartlock Movie RatingsUsing Smartlock Setting UP the Access Code Enter current access codeSmartLock control Using Smartlock Blocking Channels Press the Channel + orUsing Smartlock Movie Rating Enter the correct access code number. Xxxx shows onPress the STATUS/EXIT but- ton to remove the menu Using Smartlock TV Rating Using Smartlock Blocking OptionsUsing Smartlock Block Unrated Using Smartlock no Rating Reviewing the Smartlock Settings Example Blocking is set to OFFViewing Blocked Programming Turning on the Noise Reduction Control Interference and improve Quality of the pictureTrast + control Turn the Contrast + feature on Or OFFTurning on the Contrast + Control Contrast + option areaUsing the Closed Caption Control ModeUsing the Sleep Timer Control Good BYE SleepAdjusting the Treble , Bass , and Balance Sound Controls Balance may all be used to Adjust the sound playback of TVPrograms On a selected show and the TV is Setting the TV for Stereo and SAP ProgramsRemember, if stereo is not present Placed in the Stereo mode, the sound comUsing the Incredible Stereo Control Using the Volume BAR ControlSetting the Audio OUT Control Use the Cursor Left  or Right  buttons to setUsing the TV Speaker Control and Audio Output Jacks Using the AUDIO/VIDEO Input Jacks Connect the Video yellowUsing the AUDIO/VIDEO Input Jacks CONT’D Connect the S-VIDEOPress the Smart Picture Button repeatedly to select eitherUsing the Smartsound Control Press the Smart Sound butRead, the Surf List is Press the Channel + orPress the Surf button on EMPTY, Press to addPlace the TV/VCR/ACC Setting the Remote Control to Operate Accessory DevicesRemote control number for your Find your Three-Digit Code on pagesPress the Smart Sound Place the TV/VCR/ACCPress the VCR Record Enter the THREE-DIGITTurn on the device by press- ing the Power button on Search MethodRemote Control Direct Entry Codes Remote VCR Code noRemote Dvdcode no Using the REMOTE’S VCR Buttons Rewind ButtonTV Displays Wrong Channel or No Channels Above Tips if Something Isnt WorkingGlossary to Television Terms Index Philips Consumer Electronics Company Texas Page Limited Warranty
Top Page Image Contents