Philips TP3297B1 manual HOW to USE the AUDIO/VIDEO Input Jacks, Connect the Video yellow

Page 32

HOW TO USE THE AUDIO/VIDEO INPUT JACKS

AUDIO/VIDEO INPUTS

The TV’s Audio/Video Input jacks are for direct picture and sound connections between the TV and a VCR (or similar device) that has Audio/Video Output jacks.

BEGIN

Connect the VIDEO (yellow)

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel, to the last channel viewed, then to the AV 1 connection, then to the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel to the last viewed channel, then to the MM 1 (AV 1)

When using the Audio/Video AV 1 input jacks, the video and sound can be viewed and heard on the AV 1 channel.

When using the Audio/Video AV 2 input jacks, the video and sound can be viewed and heard on the AV 2 channel.

BACK OF TV

CABLE to the VIDEO IN jack on the back of the TV. Then con- nect the AUDIO (red and white) CABLES to the AUDIO (left and right) IN jacks on the rear of the TV (AV 1 or AV 2).

Connect the VIDEO (yellow)

CABLE to the VIDEO OUT jack on the back of the VCR. Then

connection, then to the MM 2 (AV 2) connection.

24

AV 1

AV 2

ATTENTION - TO AVOID DAMAGE

1.DO NOT CONNECT SURROUND SOUND SPEAKERS TO A SEPARATE AMPLIFIER OR TO SPEAKERS CONNECTED TO ANOTHER PRODUCT.

2.DO NOT CONNECT LEFT AND RIGHT SPEAKER OUTPUT TOGETHER.

PIP ANT "B" 75Ω

ANT "A" 75Ω

8			8
+	R –	– L +	1
SURROUND SOUND			1

S-VIDEO 1

S-VIDEO 2

VIDEO

L

AUDIO

R

AV1	AV
in	out

connect the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

Turn the VCR and the TV ON.

Use the A/V button on the remote to select the AV 1 chan- nel.

With the VCR ON and a prere- corded tape inserted, press the PLAY button to view the tape on the television.

SMART HELP

An additional accessory device can be hookup by

repeating the steps above using the AV 2 inupt jacks.

VIDEO IN (YELLOW)

AUDIO IN	2
(RED/WHITE)

					BACK OF VCR	OUT	OUT	ANTENNA
4					BACK OF VCR			IN
						R AUDIO L	VIDEO	ANTENNA
								OUT
	LOCATOR			POWER
						IN	IN
TV	AV	ON/OFF	POSITION FREEZE		3
VCR	SWAP	SOURCE	PIP CH		3
			UP	DN
ACC
	SMART			SMART
	SOUND			PICTURE		VCR
	MENU			SURF		VCR
					(EQUIPPED WITH VIDEO AND
					AUDIO OUTPUT JACKS)
	VOL			CH
		MUTE
	CC	STATUS	CLOCK	A/CH	IF YOU ARE USING A
		EXIT	TV/VCR		MONO DEVICE, USE
	SLEEP			TUNER	ONLY THE AUDIO R
	SLEEP			TUNER		JACK.
				A/B		JACK.
	VCR			MULTI
	RECORD	INCREDIBLE		MEDIA

STEREO

32

Image 32

Contents TP3297B1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features SET-UP and Quick USE GuideHOW to Adjust the TV Picture Buttons to adjust the selected controlPress the STATUS/EXIT button To remove the menu from the screenSetting the TV’S Clock Press the Cursor Down button until the word FeaturesPress the Numbered buttons Cursor UP or CursorRemote to show the onscreen menu Activating the TV’S on Timer ControlPress the Menu button on Selecting the TV’S on Timer Channel Button again to highlight the channel indicator areaPress the Cursor UP or Cursor Down buttons to Setting the TV’S on Timer TunerPress the Cursor Down Use the Cursor UP or CUR Setting the TV’S on Timer Start TimeTo enter the desired start up time Setting the TV’S on Timer Display Understanding Smartlock Movie RatingsUsing Smartlock Setting UP the Access Code Enter current access codeDown to highlight SmartLock controlUsing Smartlock Blocking Channels Press the Channel + orExternal inputs on the rear of the TV Input jacks. Select AV 1 or AV 2Using Smartlock Movie Rating Press the Cursor Right Button to access the movie ratingsBe highlighted Button to select Movie RatingButton to select TV Rating Using Smartlock TV RatingAppear within the menu Using Smartlock Blocking OptionsUsing Smartlock Block Unrated Using Smartlock no Rating Press the Menu button on the remote to show the on-screenMenu Left button to set noReviewing the Smartlock Settings Example Blocking is set to OFFViewing Blocked Programming XxxxTurning on the Dynamic Noise Reduction Picture Control Turning on the Contrast + ControlTurn the INCR. PICT. feature on or Turning on the Incredible Picture ControlPress the Cursor Down to highlight the INCR. PICT. con TrolUsing the Closed Caption Control Caption MODECC1, CC2, CC3, CC4, CC MUTE, or OFFUsing the Sleep Timer Control SleepUsing TREBLE, BASS, and Balance Sound Controls HOW to SET the TV for Stereo Programs Will reproduce any stereo broad- cast signal it receivesButton to select the Sound menu Stereo selected the televisionUsing the Incredible Stereo Feature Using the TV Volume BAR ControlPress the Volume + or Press the Volume + or butUse the Cursor Right Or Cursor Left Using the TV Speaker Control and Audio Output JacksPress the Cursor Down button to select the Speaker Using the Surround Sound External Speaker Connections Connect both external speakCable to the Video OUT jack on the back of the VCR. Then HOW to USE the AUDIO/VIDEO Input JacksConnect the Video yellow Connect the S-VIDEO Not SuppliedUsing the Remote Locator Feature Press the Power button onWithin a few seconds a Chirping or beeping sound will Once you find the remoteHoming signal Naled when the TV is turnedFor most homes this step would Not be needed but for your inforPress the Smart Picture Press the SmartPicture buttonUsing the Smartsound Control Press the Smart Sound butPress the Cursor Left Using the TV’S Channel Surf ControlPress the Surf button on Setting the Remote Control to Work with Other Devices Is necessaryPlace the TV/VCR/ACC Press the VCR RecordPress the SmartSound button Enter the THREE-DIGITDevice your are attempting to program to turn on Press the Power button onMode Switch in the proper posi Tion Remote Control Direct Entry Codes Remote VCR Code noRemote Dvdcode no Using the REMOTE’S VCR Buttons Using the PIP PICTURE-IN-PICTURE Feature Hooking up PIPTurn the TV and VCR or Press the PIP ON/OFF butPress the PIP Source but AV 1, AV 2, S-VIDEOPress the PIP ON/OFF but Press the PIP ON/OFF buttonPressing the ON/OFF button a Press the PIP PositionAdjusting the PIP Color and Tint First use an optional signal More PIP PICTURE-IN-PICTURE ConnectionsTelevision On the VCR to the Video in jack on the TVConnect the yellow Video Cable First connect the original cableConnect the ANT OUT jack on TV Displays Wrong Channel or No Channels Above Tips if Something Isnt WorkingGlossary to Television Terms Index Philips Consumer Electronics Company Texas Limited Warranty