3 Turn on the amplifier by rotating the VHF/ UHF gain control knob towards the max position until better reception is achieved.
Mount on the wall
Mount two wood screws onto the wall. Ensure the distance between two screws is 80mm (3.149”).
Tip
•• For best reception, turn the gain control down to a lower setting.
For UHF reception
1 Turn the TV to the desired channel/ station.
2 To turn the amplifier up, rotate the gain control knob towards the max position.
Note
•• It is possible to turn the gain control knob down for best reception.
8EN
Set up a digital tuner with this antenna
You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive viewable channels.
There are two ways to connect the antenna to the TV:
•Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically .
•Connect the antenna directly to the TV.
Tune to the analogue channels and find the best antenna location. Then re- connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner.