Troubleshooting
Considerable noise in radio broadcasts.
The remote control does not function.
The display is dark.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan
✔Tune in to the correct frequency.
✔Connect the antennas.
✔Fully extend the FM wire antenna. Position for best reception and secure to a wall.
✔Connect an outdoor FM or MW antenna.
✔Adjust the direction and position for best reception.
✔Place the antenna farther away from any equipment that may be causing the noise.
✔Increase the distance between the system and your TV or other equipment.
✔Select the correct source (DISC or TUNER, for example) before pressing the function button.
✔Point the remote control at the remote sensor of the unit.
✔Reduce the distance to the player.
✔Remove any possible obstacles.
✔Replace the batteries with new ones.
✔Check that the batteries are loaded correctly.
✔Press DIM again.
✔Place the DVD micro system as far away as possible from electrical devices that may be causing interference.
✔Check all speakers for correct polarity.
✔Check that the output of the video signal is switched to 'Ypbpr'.
English
37