DVD590M_17x 6/11/2003 1:42 PM Page 36
36 Digital Output
Adjust DIGITAL OUTPUT if you connected the DVD Player to a Stereo using the Player’s COAXIAL (DIGITAL AUDIO OUTPUT) jack.
1 Press SYSTEM MENU.
2 Press 1 or 2 repeatedly to select the AUDIO menu.
3 Press 4 to select DIGITAL OUTPUT.
4 Press 1 or 2 repeatedly to select BITSTREAM, LPCM 48K,
LPCM 96K, or OFF. Then press OK.
●Choose BITSTREAM if you connected to a Stereo using the Player’s COAXIAL ( DIGITAL AUDIO OUTPUT) jacks.This selects the original settings as received by most Stereos. If the sound is distorted, your Stereo may need to receive audio in an LPCM (Pulse Code Modulation) format.
●LPCM 48K or LPCM 96K
Discs are recorded in a certain sampling rate. The higher the sampling rate, the better the sound quality. Some Discs are recorded in a high sampling rate of LPCM 96 KHz, while most are recorded at 48 KHz. Choose LPCM 96K only if your Discs were recorded at 96 KHz. Otherwise, set DIGITAL OUTPUT to LPCM 48K.
1 | 2 | 3 |
|
|
|
| EJECT |
4 | 5 | 6 |
|
7 | 8 | 9 | 0 |
PREVIOUS |
|
| NEXT |
DISC MENU |
|
| SYSTEM MENU |
OK
RETURN/TITLEDISPLAY
SUBTITLE ANGLE ZOOM AUDIO
REPEAT REPEAT SEARCH MUTE
1,5
DVD
AUDIO
DIGITAL OUTPUT | BITSTREAM |
: MOVE |
|
|
| : SELECT SYSTEM MENU : EXIT |
5 Press SYSTEM MENU to remove the menus.
Helpful Hint
• If you set DIGITAL OUTPUT to LPCM 96K, the sound may be mute if the Disc is copy protected by the Content Scrambling System (CSS).