Preparation
–Black level shift (NTSC output only)
Select ON for adapting the colour dynamics to obtain richer contrasts.
–Video shift
Use this setting to personalize the position of the picture on your TV by scrolling it to the left or right.
–Monitor type selection
Allows you to select the type of display device that is connected to the DVD Video player.
In each device, a set of predefined settings (eg.
Notes:
–You can select one of the following display devices: eg.TV, Plasma TV,Video Projector and Projection TV.
– Smart Picture
¶Colour settings
You can select one of five predefined sets of colour settings and one set (Personal) which you can define yourself.
You can also press SMART PICTURE key (front panel) to access the smart picture in the menubar.
¶When Personal is selected it allows you to fine- tune saturation, brightness and contrast
¶Use 3 or 4 keys to adjust the values of these parameters.
–TV System (NTSC/PAL Conversion)
Allows you to select between PAL, NTSC and AUTO mode depending on your TV.
The conversions supported are as follows:
|
|
|
|
|
|
|
|
|
| Disc | Output format |
| |||
| Type |
| Format | Selected mode |
| ||
|
|
|
| NTSC | PAL | AUTO |
|
| DVD |
| NTSC | NTSC | PAL | NTSC |
|
|
|
| PAL | Not | PAL | PAL |
|
|
|
| Supported |
| |||
| VCD |
| NTSC | NTSC | PAL | NTSC |
|
|
|
| PAL | NTSC | PAL | PAL |
|
|
|
|
|
|
|
|
|
1In the Personal Preferences Menu, select TV System.
2Press 3 or 4 to select PAL, NTSC or AUTO.
Notes:
–If you have a PAL only TV, ensure that your PAL/NTSC setting is PAL.
–AUTO can only be selected when using a TV that has both the NTSC and PAL systems.
–This setting is applicable for CVBS output on cinch and SCART only.
–Slight picture distortions may occur due to this conversion.This is normal.Thus, the AUTO format is most suitable for the best picture quality.
E n g l i s h
13