Philips DVD733/051 manual Introduction, Environmental Information, Supplied accessories

Page 6

Introduction

E n g l i s h

Thank you for purchasing this Philips DVD player. This Owner’s Manual explains the basic operation of this DVD player.

Environmental Information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Supplied accessories

Remote control

Batteries (two AA size) for remote control

Audio cable

SCART cable (not available for all versions)

CVBS cable

Owner’s Manual

Safety Information

Before operating the DVD player, check that the operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) is identical with the voltage of your local power supply. If not, please consult your dealer.

Place the DVD player on a flat, hard and stable surface.

There must be sufficient room in front of the player for the drawer to be opened.

In cabinet, allow about 2.5cm (1 inch) of free space all around the player for adequate ventilation.

Do not expose your player to extreme of temperature or humidity.

If the DVD player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens of the disc unit inside the DVD player. Should this occur, the DVD player would not operate normally. Leave the power on for about one hour with no disc in the DVD player until normal playback is possible.

The mechanical parts of the set contain self- lubricating bearings and must not be oiled or lubricated.

When the DVD player is switched to Standby mode, it is still consuming some power. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.

Symbols Used in this Manual

The below symbols appear in some headings and notes with the following meanings:

DVD – Description refers to playback of DVD-video discs

 

VCD

 

– Description refers to playback of Video CDs

 

 

 

 

 

 

 

 

 

 

 

 

CD

– Description refers to playback of Audio CDs

Helpful Hints!

Some DVD video discs require specific functions or allow only limited functions during playback.

” may appears on the TV screen which means that the function is not available on that specific DVD video disc.

6

3141 015 21101

Image 6
Contents 3141 015 Important Note Index Laser safety Never Make or Change Connections with the Power Switched onGeneral Information Contents Symbols Used in this Manual Supplied accessoriesSafety Information IntroductionFunctional Overview Front and Rear PanelsRemote Control Connecting to a TV PreparationBasic Connections Connecting to an Audio System Connecting to Optional EquipmentIf your receiver has a Mpeg 2 or Dolby Digital decoder Inserting batteries into the Remote Control Switching OnUsing the Remote Control Basic Playback General FeaturesOperation Video Control during playbackOSD On-Screen Display Special DVD Features Special VCD & Svcd Features Playback Control PBCPreview VCD Svcd Picture CD & MP3 CD Playback Picture CD and MP3 CD simultaneous playback General SetupBasic Operations Disc LockSetup Menu VFD DimOSD Language Screen Saver Speaker setupDownmix mode C Dynamic Range CompressionSpdif OUT setup Spdif setupVideo Out Setup Lpcm 96K modeTV Type Video modeSmart Picture 169Preferences setup Personal Picture settingAudio language Password Subtitle languageDisc menu language Default Parental ControlSmart Navigator Specifications MaintenanceTroubleshooting Problem Solution3141 015 DVD733