10 Hookups (cont’d)
Connecting to a TV and a Stereo
TV has Component Video In Jacks
●Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages
Back of TV
(example only)
DVD Player
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUT |
PCM / BITSTREAM |
VIDEO OUT AUDIO OUT
Y
| OPTICAL COAXIAL |
COMPONENT | 2 |
VIDEO IN | |
Y |
1
2Cb
1Cr
R L
1
AUDIO (RIGHT) IN
AUDIO (LEFT) IN
Back of Stereo (example only)
Connect the red and white audio cables to the red and white AUDIO OUT jacks (either 1 or 2) on the DVD Player and to the red and white AUDIO IN jacks on the Stereo, matching the cable colors to the jack colors.
2
Connect an optional component video cable to the COMPONENT VIDEO OUT jacks on the DVD Player and to the COMPONENT VIDEO IN jacks on the TV.
3
Plug in the Stereo’s power cord. Turn on the Stereo and select the Stereo’s Auxiliary IN station. During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner’s manual for details.
4
Plug in the TV’s power cord. Turn on the TV and set it to the Component Video In channel, which usually is located near channel 00. During Audio CD playback, you may check the status of Audio CDs on your TV screen. During DVD playback, you will watch the program on the TV. See your TV owner’s manual for details.
5
Connect the DVD Player’s power cord to a power outlet.
Press the POWER button to turn on the DVD Player. “HELLO” will appear briefly on the DVD Player’s display panel. You should see the DVD logo on the TV screen briefly. If you do not, check your con- nections and make sure the TV is on the correct channel. If there is no disc in the DVD player, “no DISC” will appear on the display panel.