Digital Stereo/Receiver Example only Back of TV

Hookups (cont’d) 13

Connecting to a TV and a Digital Stereo

(Receiver has PCM, Dolby DigitalTM, MPEG2, or Digital Theater System)

Digital Stereo/Receiver

(example only)

Back of TV

(example only)

COAXIAL IN

	SURROUND CENTER	FRONT
AUDIO OUT		L	1
PCM/MPEG2/	L	L	1
Digital-DTS	L
Digital-DTS

VIDEO IN

R	R	2
R

COAXIAL	OPTICAL	SURROUND	SUB WF	FRONT	AUDIO	CVBS Pr/Cr Pb/Cb	Y	S-VIDEO
COAXIAL	OPTICAL	MULTICHANNEL AUDIO OUT			OUT	VIDEO OUT

1 Connect the supplied yellow video cable to the Player’s yel- low CVBS (VIDEO OUT) jack and to the corresponding VIDEO IN jack on your TV. There are two CVBS (VIDEO OUT) jacks in case you want to connect the Player to two separate TVs. For simply connecting the Player to a single TV, you may use either of the jacks, but you will not have to use both.

2 Connect one of the Player’s DIGITAL AUDIO OUT jacks (COAXIAL or OPTICAL) to the corresponding DIGITAL AUDIO IN jack on your Stereo. You only need one connection, so you will not use both jacks. Use a digital audio cable (not sup- plied).

3 Connect the power cords of the Player, TV, and Stereo to a power outlet.

Press STANDBY-ON on the front of the Player to turn on the Player. The red Standby light will disappear.

4 Turn on the TV and set it to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1 or EXT2, etc. These channels often are near channel 00. See your TV owner’s manual for details. Or, change channels at the TV until you see the Player’s blue screen saver on the TV screen.

Turn on the Stereo and set it to the correct Audio In chan- nel or sound source. Refer to the Stereo’s manual.

5 Set the Player’s Digital output. Details are on page 39.

Helpful Hints

•If your Digital Output setting does not match your Stereo’s capabilities, the Stereo may produce a strong, distorted sound or no sound at all.

•You will have six-channel digital surround sound with this con- nection only if your Stereo has a digital multichannel decoder.

•Your Stereo must support MPEG2, Dolby DigitalTM or Digital Theater System (DTS). Check the Stereo’s manual.

•When playing MP3 files or SACDs, you will not have sound if you use the DIGITAL AUDIO OUT jacks.

•You may use S-Video or Component Video connections instead for higher picture quali- ty. These options must be avail- able on your TV. Details are on pages 10-11.