![](/images/new-backgrounds/1252095/25209525x1.webp)
Hookups (cont’d) 13
Connecting to a TV and a
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
Back of TV | Stereo |
(example only) | (example only) |
Antenna
or Cable TV Signal
| RIGHT AUDIO IN |
LEFT AUDIO IN | |
|
4 2
| EXT 3 | L | L | EXT 3 | 3 |
| COMPONENT VIDEO | PROG |
|
|
|
|
| SCAN |
|
|
|
| Y | Y |
|
|
|
PB | PB | PB |
|
| L |
PR | PR | PR | R |
|
| R | R |
IN
RC 6
EXT 2 | EXT 1 | EXT 1/2 |
1
1 Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the DVD Recorder.
2 Connect the supplied
3 Connect a supplied
4 Connect the supplied power cord to the MAINS (AC Power) jack on the rear of the DVD Recorder. Connect the power cords of the DVD Recorder, Stereo, and TV to a power outlet.
5 Turn on the Stereo power and set your Stereo to the cor- rect Audio In channel or sound source. Refer to the Stereo owner’s manual.
6 Press the STAND BY/ON button on the front of the DVD Recorder to turn on the DVD Recorder. The STAND BY/ON light will turn green.
7 Turn on the TV power. Set the TV to the correct
The Initial Setup screen will appear the first time you turn on the Recorder. Go to page 16 to continue.
Helpful Hints
•Set the Analog output accord- ingly. Details are on page 57.
•If you prefer or need to use the VIDEO OUT (CVBS) or COM-
PONENT VIDEO OUT Y PB PR jacks instead, see pages 10 and 12. You only need one video connection.