Philips DVDR1000 owner manual Digital Output, Press 9 repeatedly to select G, then press

56 Digital Output

After connecting the DVD Recorder to your TV and other equipment, you may need to change the DVD Recorder’s Digital Output setting. Look to see which DVD Recorder audio jacks you connected to your other equip- ment, then set your Digital Output accordingly. The information in step 4 will help you make your choice.

You only need to adjust the Digital Output if you used the DIGITAL AUDIO OUT (OPTICAL or COAX) jacks of the Recorder. (If you used the red and white AUDIO OUT jacks, see page 57 to adjust the sound.)

TUNER ON/OFF

STOPREC/OTRPLAY

1,5 SLOW FORWARD

NEXT

Press SYSTEM MENU.	may be selected. If it is not, press ;
1 to select it.

2 Press 9 repeatedly to select G, then press :.

3 Digital output will be selected. Press :. If Digital output is not selected, press 89 to select it.

Press 89 to select Off, PCM only, or All, then press OK.
● Select All if you used the COAX (coaxial) DIGITAL AUDIO OUT
4 jack to connect the DVD Recorder to a Stereo Receiver that has a
built-in Multi-channel Decoder. Details are on page 14.
● Select Off if you did not use either the COAX (coaxial) or OPTI-
CAL DIGITAL AUDIO OUT jack. For example, if you used the sup-
plied audio cables to connect the red and white AUDIO OUT jacks
of the DVD Recorder to a TV or Stereo, select Off. See page 57 to
adjust your analog sound settings.
● Select PCM only if you used the COAX (coaxial) or OPTICAL
DIGITAL AUDIO OUT jacks of the DVD Recorder for connec-
tions, but the audio equipment does not include a built-in digital
multi-channel Decoder.
		W	X	Y	Z	a
~	1		2	1en	off no	off
						Sound
G		Digital output			s Off
		Analog output			PCM only	K
r		Night mode			All	L

5 Press SYSTEM MENU to remove the menus.

EDIT

4

2-4TIMER SELECT

VOL CH

MUTE

T/C			A/CH
ZOOM	ANGLE	SUBTITLE	AUDIO
DIM	REPEAT	REPEAT	SCAN