Philips DVDQ50 owner manual Speaker Settings

Speaker Settings 49

Allows you to select speaker settings, volume balance and delay time and to test the speaker settings.

Speaker settings are only active on the Analog Multi-Channel Output.

1

Press SYSTEM MENU. will be selected.

2

Press 9 repeatedly to select G, then press :.

3

Press 9 repeatedly to select Speakers, then press :.

Z Y d

1en 1en 1 st

Speakers

s
Front L & Rs
Center
Surround L
Surround R
Sub Woofer
OK to exit	0dB L 0dB

4

Press 8 or 9 to select the speaker you want to adjust. Select Front L & R (left and right), Center, Surround L (left), Surround R (right), or Sub Woofer. Your audio system may refer to the Surround speakers as the rear speakers.

5

After selecting the speaker, press :. Then, press 8 or 9 to adjust the sound of the speaker.

Press OK to go back and select another speaker. Repeat steps 4-5 as often as necessary until you are satisfied with the speaker settings.

6

Press SYSTEM MENU to remove the menus.

1,6

2-5

Helpful Hint

•The Dolby Digital licensing agreement does not prohibit any particular speaker settings. Instead, it gives guidelines for possible speaker settings.